Problem
Cause/solution
The handset beeps.
R
New messages have been recorded. Listen to the new
messages (page 41).
The handset display
begins operating
automatically.
R
Demonstration mode is activated. Please connect the
telephone line cord to the telephone line jack (page 10).
Menu list
Problem
Cause/solution
The display is in a
language I cannot read.
R
Change the display language (page 13).
I cannot activate the eco
mode.
R
You cannot set eco mode when you set the DECT repeater
mode
“
On
”
. If required, set the DECT repeater mode to
“
Off
”
I cannot display the
wallpaper.
R
Wallpaper is displayed in the standby mode only when you
select
“
Digital(Small)
”
or
“
Off
”
for the clock setting.
Change the clock setting (page 24).
I cannot register a handset
to a base unit.
R
The maximum number of base units (4) is already registered
to the handset. Cancel unused base unit registrations from the
handset (page 33).
R
The maximum number of handsets (6) is already registered to
the base unit. Cancel unused handset registrations from the
base unit (page 33).
R
You entered the wrong PIN. If you forget your PIN, see “I
cannot remember the PIN.” (page 52).
I cannot remember the
PIN.
R
Change the PIN using the following method.
1
M
Menu
N
(right soft key)
#132
2
*7000
3
Enter the new 4-digit base unit PIN.
a
M
OK
N
4
MbN
:
“
Yes
”
a
M
OK
N
a
M
N
Battery recharge
Problem
Cause/solution
The handset beeps and/or
flashes.
R
Battery charge is low. Fully charge the batteries (page 10).
I fully charged the
batteries, but
–
still flashes or
– the operating time
seems to be shorter.
R
Clean the battery ends (
,
) and the charge contacts with
a dry cloth and charge again.
R
It is time to replace the batteries (page 10).
52
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
Useful Information
PNQX6032YA_0529_ver110.pdf 52
2013/05/29 12:39:49