4
4
Installations and connections
Installing the ink film
When the unit runs out of ink film, the following message will be displayed.
Install a new ink film.
2
Pull up the green lever
and open the back cover.
1
Open the control panel.
4
If the ink film is slack, tighten it by
winding this gear (orange).
3
Insert the ink film.
Flat white surface
Glass
Insert the orange
gear into the left slot
of the main unit.
Insert the white
gear into the right slot
of the main unit.
6
Close the control panel.
5
Close the back cover pressing
“ ” down on both sides
until it clicks into place.
Replacement ink film:
KX-FAN190
(15 m)
¥
714
KX-FAN190W
(15 m x 2)
¥
1,208
KX-FAN191
(15 m)*
1
¥
893
KX-FAN191W
(15 m x 2)*
1
¥
1,523
・
As of October 2011
・
Tax included
*1 KX-FAN191/KX-FAN191W leaves a fainter print trail on the film
than KX-FAN190/KX-FAN190W does.
•
Do not place the ink film on the back side of
the control panel. Any ink adhering to the glass
or flat white surface may cause black or white
lines to appear on the recording paper or the
recipient's fax.
フィルムノコウカンガ ヒツヨウ
フィルム (KX -FAN190) ヲ
オカイモトメクダサイ U23
KX-PD381DLE8̲DWE8̲QG.indb 4
KX-PD381DLE8̲DWE8̲QG.indb 4
2011/10/12 17:28:13
2011/10/12 17:28:13