Panasonic KX-NS1000, Руководство по программированию

Страница: 499 / 1182

PC Programming Manual References
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - BRI Port—ISDN CO— Subscriber
Number
9.28 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port—CO Setting—
Subscriber
Number
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—CLIP—
CLIP ID
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—CLIP— CLIP ID
Feature Guide References
4.1.2.2 Calling/Connected Line Identification Presentation (CLIP/COLP)
MCID
Specifies the feature number used to ask the telephone company to trace a malicious call. This feature can
be used during a call or while hearing a reorder tone after the caller hangs up.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main
Feature Guide References
4.1.2.9 Malicious Call Identification (MCID)
ISDN-FWD (MSN) Set / Cancel / Confirm
Specifies the feature number used to set or cancel the FWD of incoming ISDN calls to an outside party using
the ISDN service of the telephone company (instead of the PBX), or confirm the FWD setting.
Extension users can set the FWD destination to the network on an MSN basis.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main
Feature Guide References
4.1.2.4 Call Forwarding (CF)—by ISDN (P-MP)
4.1.2.5 Call Forwarding (CF)—by ISDN (P-P)
Message Waiting Set / Cancel / Call Back
Specifies the feature number used to set or cancel Message Waiting, or call back the caller.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
PC Programming Manual 499
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main