manualshive.com logo in svg

Panasonic KX-NS1000, Руководство по эксплуатации

Поделиться
Скачать
Panasonic KX-NS1000 Скачать руководство пользователя страница 195

To set/cancel Not Ready mode or to leave Wrap-up mode (To enter Ready mode)

PT/PS/KX-UT133/KX-UT136/KX-UT248/KX-UT670/S-PS

(Wrap-up)

While on-hook

Press red or flashing red 

Wrap-up.

*

•

* The status will be as follows:
Ready 

 Not Ready

Not Ready 

 Ready

Wrap-up 

 Not Ready

•

The Log-in/Log-out of a specified group button light shows the current status as follows:

Off:

 Log-in mode

Red on:

 Log-out mode

•

The Wrap-up button alternates the setting of Wrap-up mode, Not Ready mode or Ready
mode.
The Wrap-up button light shows the current status as follows:

Off:

 Ready mode

Red on:

 Not Ready mode

Flashing red:

 Wrap-up mode

•

In Wrap-up mode/Not Ready mode, your extension does not receive calls through any
group, even if it belongs to multiple groups.

•

The last remaining logged-in extension may not be allowed to log out, depending on system
programming.

•

The Supervisor extension can control the Log-in/Log-out status of other extensions.
For more information, refer to "1.10.2 Monitoring and Controlling the Call Status of an
Incoming Call Distribution Group (Incoming Call Distribution Group Monitor)".

Customising Your Phone

•

3.1.3 Customising the Buttons
Create or edit a Log-in/Log-out button, a Log-in/Log-out of a specified group button or a
Wrap-up button.

1.10.2  Monitoring and Controlling the Call Status of an Incoming
Call Distribution Group (Incoming Call Distribution Group
Monitor)

–

 Monitoring the Status of Waiting Calls

–

 Monitoring and Changing the Log-in/Log-out Status of Extensions

The extension assigned as a Supervisor extension can monitor and control the status of other extensions in
an incoming call distribution group. It should have a PT with 6-line display. The display and DSS buttons
show as follows:

1.10.2 Monitoring and Controlling the Call Status of an Incoming Call Distribution Group (Incoming Call Distribution

Group Monitor)

Operating Manual

195

Содержание KX-NS1000















































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды