manualshive.com logo in svg

Panasonic KX-NS1000, Руководство по программированию, Страница: 924 / 1182

Поделиться
Скачать
Panasonic KX-NS1000 Скачать руководство пользователя страница 924

23.1  UM Configuration—[4-1] Service
Settings—Caller ID / PIN Call Routing

A maximum of 200 Caller ID/PIN numbers can be assigned so that callers are automatically forwarded to a
pre-programmed destination. A different destination can be set for each time mode (day, night, lunch, break).
For 

Mode

, select 

Caller-ID Mode

 or 

PIN Mode

 from the drop-down list, and then click the 

 button to assign

a routing destination. PIN Call Routing is only available when the 

Call Transfer Anytime

 of a Custom

Service is set to "PIN".

Wild card input for Caller IDs/PINs

•

The wild card, " ", can be used as a substitute for any numbers in the following ways.

1.

When Caller ID/PIN numbers include one " ":
" " matches any number, regardless of the actual numbers of digits. For example, registering " " by
itself matches all numbers, and registering "201  " matches any number that starts with "201".

2.

When Caller ID/PIN numbers include more than one " ":
Each " " matches a single digit. For example, registering "

" matches any 10-digit

number, and registering "201

" matches any 10-digit number that starts with "201".

Note

•

If Automatic Login or Holiday Service is used, these will take priority over Caller ID Call Routing settings.
Also note that Caller ID Call Routing takes priority over the Trunk Service and Port Service.

•

Received Caller ID/PIN numbers are searched for in each service setting table in order from the first
registered number to last. When programming Caller ID/PIN routing, note the order of registration, and
remember that wild card entries should be entered after any specific routing entries.

Caller-ID Mode

Caller ID No. (Selection)

Specifies the Caller ID number setting so that callers are automatically forwarded to a pre-programmed
destination.

Value Range

Private, Out of Area, Long Distance, Others

Maintenance Console Location

23.1  UM Configuration—[4-1] Service Settings—Caller ID / PIN Call Routing

Feature Guide References

3.2.1.8  Caller ID Call Routing

Caller ID No. (Other)

Specifies a Caller ID number (or range of numbers using the wild card, " ") for callers from a specific number
or range of numbers that are to be automatically forwarded to a pre-programmed destination. Only specified
if 

Caller ID No. (Selection)

 is set to "Others".

Value Range

0–9,   (Max. 20 digits)

924

PC Programming Manual

23.1 UM Configuration—[4-1] Service Settings—Caller ID / PIN Call Routing

Содержание KX-NS1000































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов