Panasonic KX-NCP500, Руководство по установке

Страница: 34 / 142

Note for KX-NT265 IP-PT users
The supported card varies depending on the software version of your KX-NT265 IP-PT. To confirm the version,
follow the procedure below:
"
AP Version
".
Select
"Maintenance".
Software version
is displayed.
While starting up
Select
"Version display".
To exit the programming mode
PROGRAM
SP-PHONE
SP-PHONE
SP-PHONE
HOLD HOLD HOLD HOLD
Digital EXtra Device Port (Digital XDP) Connection Capacity
The number of Digital XDP ports that can be assigned depends on the following:
–
the number of connected DPTs
–
the maximum number of DPTs the PBX can support
The table below shows examples of how many Digital XDP ports can be assigned with different configurations.
For details about the Digital XDP connection, refer to "3.8.3 Digital EXtra Device Port (Digital XDP)
Connection".
Config.1 Config.2 Config.3 Config.4 Config.5
Small Free Slot – DHLC4 – – DHLC4
Regular Free Slot
DLC16 DLC16 DLC8 DLC16 DLC16
– – DLC16 DLC16 DLC16
No. of DPT ports 16 20 24 32 36
No. of Digital XDP ports 16 20 16 8 4
Total No. of DPTs (max. 40) 32 40 40 40 40
Note
With Config.3, Config.4, and Config.5, the combination of 20 DPT ports and 20 Digital XDP ports is also
possible.
Power Supply Unit Capacity
The pre-installed power supply unit (PSU) in each PBX supports a different load figure.
PBX Model Maximum Load Figure
KX-NCP500/KX-NCP1000 44
34 Installation Manual Document Version 2011-10
1.3.3 System Capacity