manualshive.com logo in svg

Panasonic KX-NCP500, Руководство пользователя

"Panasonic KX-NCP500" - это мощная IP-телефонная система для вашего бизнеса. С нашим бесплатным функциональным руководством вы сможете освоить все возможности этого устройства. Скачайте его прямо сейчас на manualshive.com и настройте свою систему легко и быстро.

Поделиться
Скачать
background image

2.1  VoIP Requirements

2.1.1  Bandwidth Assessment

When using the IP telephones and V-IPGW16 card, you must ensure that the IP network in use has enough
bandwidth to support VoIP communications. If the amount of bandwidth required for VoIP communications is
more than the network can accommodate, speech quality will be compromised. In addition, there may be an
adverse effect on the performance of other applications (e.g., email or web applications) that use the same
network. Therefore, care must be taken when assessing bandwidth requirements.
Inform your network administrator of the required bandwidth, and make sure that the network can support VoIP
communications even under conditions of maximum network traffic.

Bandwidth Assessment for Virtual IP Extension Card

Required Bandwidth per IP telephone for a Call

The required bandwidth depends on what combination of codecs and packet sending intervals is used. Keep
in mind the following points about the type of codecs and packet sending intervals, in terms of speech quality:

•

The speech quality of the codecs varies as follows: (High) G.722, G.711, G.729A (Low)

*1

•

The shorter the packet sending interval, the higher the speech quality.

•

The higher the speech quality the IP telephones provide, the more bandwidth the IP telephones require.

*1

When the preferred codec of each party differs, the call will be established using the lower codec. For example, if the caller prefers
G.711 while the called party prefers G.729A, the call will be established using G.729A.

Codec

Packet Sending Interval

20 ms

30 ms

40 ms

60 ms

G.722

*1

/G.711

87.2 kbps

79.5 kbps

—

—

G.729A

31.2 kbps

23.5 kbps

19.6 kbps

15.7 kbps

*1

G.722 is only available for the KX-NT300 series IP-PTs and some SIP Extensions that support this codec during peer-to-peer
communication. For details, refer to "13.1.8  Peer-to-Peer Connection" in the Feature Manual.

Required Bandwidth for Each Virtual IP Extension Card

To allow all IP telephones to make calls simultaneously, it is necessary to keep available the bandwidth required
by a virtual IP Extension card with the maximum number of IP telephones connected.
Provided below is the formula to calculate the amount of bandwidth required for each virtual IP Extension card.

Required Bandwidth

 = (Required Bandwidth per IP telephone 

´

 32)

Bandwidth Assessment for V-IPGW16 Card

Required Bandwidth for One VoIP Channel

The required bandwidth depends on what combination of codecs and packet sending intervals is used. Keep
in mind the following points about the type of codec and packet sending interval, in terms of the speech quality:

•

The speech quality of the G.711 codec is higher than that of the G.729A codec.

•

The shorter the packet sending interval, the higher the speech quality.

•

The higher the speech quality the V-IPGW16 card provides, the more bandwidth the card requires.

14

IP Networking Guide

Document Version  2009-12  

2.1.1 Bandwidth Assessment

Содержание KX-NCP500

































































































Отзывы:

Нет отзывов

Похожие инструкции для KX-NCP500

Karel MS48IP Programming Manual preview
MS48IP
Бренд: Karel Страницы: 96

Бренды по названию

Популярные бренды

Загрузить еще бренды