Panasonic KX-MC6040 - Color Laser Multi-Function..., Руководство по эксплуатации

Страница: 71 / 124

9. Programmable Features
71
Approving users for the LAN
connection
{#}{
5
}{
3
}{
2
}
{
0
}
“
Disabled
” (default): Deactivates this feature.
{
1
}
“
Enabled
” : The unit will deny/approve access from the pre-programmed
IP patterns. Whether to deny or approve, and up to 4 patterns can be
programmed through the web browser interface.
1. Start Multi-Function Station.
2.
[
Utilities
]
i
[
Configuration Web Page
]
i
[
Network Configuration
]
3. Type “root” as the user name, then enter the password (feature #155 on
page 57). i
[
OK
]
4. Select the
[
LAN Feature
]
tab.
5. Click
[
Edit
]
next to
[
Approved Users
]
.
6. Click
[
Edit
]
next to
[
Filter
]
.
7. Change the mode and edit IP filtering information. i
[
Submit
]
8. Close the web browser.
Setting the IP address
automatically for the LAN
connection
{#}{
5
}{
3
}{
3
}
This feature will be displayed only when feature #500 is activated.
{
0
}
“
Disabled
” (default): Deactivates this feature.
{
1
}
“
Enabled
” : IP address will be allocated automatically without using a
DHCP (Dynamic Host Configuration Protocol) server.
Setting HTTPD for the LAN
connection
{#}{
5
}{
3
}{
4
}
{
0
}
“
Disabled
” : Denies access to the web browser.
{
1
}
“
Enabled
” (default): Allows access to the web browser.
IPv6 protocol
{#}{
5
}{
3
}{
5
}
{
0
}
“
Disabled
” (default): Deactivates this feature.
{
1
}
“
Enabled
” : IPv6 protocol can be used. After installing the printer driver, be
sure to change the port to IPv6 protocol. You can check the IPv6 protocol
address by printing the
“
Setup List
” (page 104).
Note:
L
To activate this feature, you need to turn the power switch of the unit OFF,
then ON.
Setting the paper input tray to
use for the scan to e-mail
print feature
{#}{
5
}{
6
}{
5
}
This feature will be displayed only when the optional input tray is installed.
{
1
}
“
#1
” (default): Standard input tray
{ 2 } “
#2
” : Optional input tray
{
3
}
“
#1+#2
”
Note:
L
If you select “
#1+#2
” , make sure the same paper size is selected for the
following:
–
Standard input tray (feature #380 on page 58)
– Optional input tray (feature #382 on page 58)
If either is changed, “
#1
” will be selected automatically.
Feature/Code Selection