11. Help
76
11.3.4 Copier
11.3.5 Fax (KX-MB773/KX-MB783 only)
Even after clicking
[
Cancel
]
,
scanning continues.
L
Please wait. It may take a while for the cancel request to be accepted.
The name of the desired
computer will not be
displayed on the unit when
scanning documents from
the unit (KX-MB783, LAN
connection only).
L
The printer driver has not been installed. Install it on your computer (page
28).
L
The PC name list up feature has been set to
[
Off
]
. Set to
[
On
]
in the
[
Settings
]
(page 30).
L
The maximum number of computers on the LAN is connected to the unit (up
to 30 computers). Set the PC name list up feature to
[
Off
]
on the other
computers (page 30).
L
The IP address of the unit may have changed. To detect the IP address,
proceed as follows.
[
Start
]
i
[
All Programs
]
or
[
Programs
]
i
[
Panasonic
]
i
the
unit’s name
i
[
IP Address Checker
]
.
L
The IP address for the unit will be detected.
Problem
Cause & Solution
The unit will not make a copy.
L
You cannot make a copy during programming. Make the copy after
programming.
L
The document was not fed into the unit properly. Re-insert the document.
L
Recording paper is not installed or the unit has run out of paper. Install
paper (page 18).
L
Recording paper is installed in the manual input tray. Remove the recording
paper from the manual input tray.
Letters on the copied
documents are not clear.
L
The original document is too dark or too light. Change the contrast setting
by pressing
{
CONTRAST
}
repeatedly, and try again.
The copied documents are
too dark and cannot be read.
L
You used a coloured paper as a document. Change the contrast (page 36)
and make a lighter copy of the document, using
“
TEXT
”
resolution (page
36).
Problem
Cause & Solution
I cannot send documents.
L
The telephone line cord is connected to the
[
EXT
]
jack on the unit. Connect
to the
[
LINE
]
jack (page 21).
L
The other party’s fax machine is busy or has run out of recording paper. Try
again.
L
The other party’s machine is not a fax machine. Check with the other party.
L
The other party’s fax machine failed to answer the fax automatically. Send
the fax manually (page 43).
I cannot send a fax overseas.
L
Use the overseas transmission mode (feature #411 on page 59).
L
Add two pauses at the end of the telephone number or dial manually.
The other party complains
that letters on their received
document are distorted.
L
If your line has special telephone services such as call waiting, the service
may have been activated during fax transmission. Connect the unit to a line
that does not have these services.
L
Another telephone on the same line is off the hook. Hang up the extension
telephone and try again.
Problem
Cause & Solution
MB263HX_773_783EX-PFQX2807ZC-OI-en.book Page 76 Monday, August 6, 2007 11:42 AM
