Panasonic KX-MB2085CX, Руководство по эксплуатации

Страница: 35 / 124

2. Place the next document on the scanner glass
and press
M SET N . Repeat this until you have
scanned all pages, and then press M START N .
R The unit will start copying.
When using the automatic document feeder:
M START N
8
After you finish copying, press M STOP N to reset this
feature.
Example: Making 2 copies of a 4-page original
document
4
3
2
1
4
3
2
1
4
4
3
3
2
2
1
1
Collated pages Uncollated pages
Note:
R The unit will store the documents into memory at a
reduced resolution while collating the copies. If the
memory becomes full while storing, the unit will only
print out the stored pages.
R You can hold the previous collate setting (feature
#469 on page 66).
Proof set feature
To make 1 set of a collated copy first, press MCN or MDN
repeatedly to display “
PROOF SET
” (step 4 on
“5.2.2 Collate copy”, page 34). The unit will make 1 set
of a collated copy and stop temporarily so you can check
whether the copy was made as you expected. If the copy
is correct, press
M START N to continue copying.
If the copy is not correct, press M STOP N and start again
from the beginning.
5.2.3 Quick ID copy feature / Image repeat
feature (Scanner glass only)
Quick ID copy feature: To copy 2-sided documents
onto one page.
Image repeat feature: To copy a single document
repeatedly onto one page.
Note:
R The copied documents will not be reduced to fit the
recording paper, and useful for copying small sized
documents such as business cards.
1
Set the original (page 19).
R To make a landscape copy, set the original in
landscape direction. To make a portrait copy, set
the original in portrait direction.
R The scanning area changes according to the
selected setting in step 4. See the following table
for details. The shaded area will be scanned.
2
Press M PAGE LAYOUT N repeatedly to select “
PAGE
LAYOUT
” .
3
Press MCN or MDN repeatedly to select “
QUIK ID
COPY
” or “
IMAGE REPEAT
” . A M SET N
4
Press MCN or MDN repeatedly to select the number of
original documents from “
2 in 1
” , “
4 in 1
” or “
8
in 1 ” . A M SET N
R For quick ID copy feature, go to the next step.
R For image repeat feature, go to step 6.
5
Press MCN or MDN repeatedly to select the page layout
from “
LANDSCAPE
” or “
PORTRAIT
” . A M SET N
6
If necessary, enter the number of copies (up to 99).
7
Quick ID copy feature:
1.
M START N
R The unit will scan 1 page.
2. Place the next document on the scanner glass
and press
M SET N . Repeat this until all the
documents are scanned.
R The unit will start copying.
R You can press M START N anytime to start
copying.
Image repeat feature:
M START N
8
After you finish copying, press M STOP N to reset this
feature.
Note:
R You can save the previous page layout setting
(feature #467 on page 66).
For quick ID copy feature
Original document Page layout
“
2 in 1
” “
LANDSCAPE
”
“
PORTRAIT
”
35
5. Copier