manualshive.com logo in svg

Panasonic KX-MB2060C, Руководство по эксплуатации

Поделиться
Скачать
Panasonic KX-MB2060C Скачать руководство пользователя страница 57

8.1 Sending a fax manually

8.1.1 Using the scanner glass

By using the scanner glass, you can send a page from
booklets or small size paper.

M

Resolution

N

M

Contrast

N

M

Redial

N

M

Fax

N

M

Start

N

M

Set

N

1

If the 

M

Fax

N

 light is OFF, turn it ON by pressing

M

Fax

N

.

2

Set the original (page 25).

3

If necessary, change the resolution and contrast
according to the type of document.

R

To select the resolution, see page 57.

R

To select the contrast, see page 57.

4

Dial the fax number.

5

Press 

M

Start

N

 to scan the document into memory.

Wait until 

“

SCAN:PRESS SET

”

 

“

SEND:PRESS

START

”

 is displayed.

R

To send a single page, go to step 7.

R

To send multiple pages, go to the next step.

6

Place the next page on the scanner glass. 

A

 

M

Set

N

R

To send more pages, repeat this step.

7

M

Start

N

Note:

R

To stop sending, see page 107.

R

You can change the default operation mode (feature
#463 on page 81) and the timer before returning to
the default operation mode (feature #464 on
page 81).

To select the resolution
1.

Press 

M

Resolution

N

 repeatedly.

–

“

STANDARD

”

: For normal-sized characters.

–

“

FINE

”

: For small-sized characters.

–

“

SUPER FINE

”

: For very small-sized characters.

–

“

PHOTO

”

: For photographs, shaded drawings,

etc.

2.

M

Set

N

R

Using the 

“

FINE

”

, 

“

SUPER FINE

”

 and 

“

PHOTO

”

settings will increase transmission time.

To select the contrast

Adjust this setting depending on the darkness or
lightness of the document. 5 levels (low to high) are
available.
Press 

M

Contrast

N

 repeatedly. 

A

 

M

Set

N

To redial the last number

M

Redial

N

R

If the line is busy, the unit will automatically redial the
number 1 time.

Note:

R

To stop sending, see page 107.

Reserving the fax transmission (Dual Access)

You can reserve a fax transmission even when the unit
is just receiving a fax or sending a fax from memory.
– Up to 3 reservations when sending
– Up to 4 reservations when receiving

1.

Set the original during fax reception or fax memory
transmission.

2.

Enter the fax number using the dial keypad,
one-touch dial or phonebook.

3. When using the scanner glass,

 press 

M

Start

N

. The

unit will scan 1 page. Place the next document on the
scanner glass and press 

M

Set

N

. Repeat this until all

the documents are scanned, then press 

M

Start

N

.

When using the automatic document feeder,

press 

M

Start

N

.

R

If the document exceeds the memory capacity, the
reservation for that document will be cancelled. You
must send the entire document manually.

Printing a confirmation report

A confirmation report provides you with a printed record
of transmission results. To print the confirmation reports,
make sure that feature #401 is activated (page 83). For
an explanation of the messages, see page 108.

Printing a journal report

A journal report provides you with a printed record of the
30 most recent faxes. To print it manually, see
page 136. To print it automatically after every 30 new
fax transmissions and receptions, make sure feature
#402 is activated (page 83). For an explanation of the
messages, see page 108.

57

8. . Fax

8. Fax

Содержание KX-MB2060C





























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды