Panasonic KX-MB1500E, Руководство по эксплуатации

Страница: 53 / 92

Feature/Code Selection
Changing the password for
feature programming via
remote operation
MBNM 1 NM 5 NM 5 N
1. M Menu N A MBNM 1 NM 5 NM 5 N A M Set N
2. Enter the current password. A M Set N
R The default password is “
1234
” .
3. Enter a new 4-digit password using 0-9. A M Set N
4. Enter the new password again. A M Set N A M Menu N
Note:
R It is recommended that you change this password from the default
password.
Setting the toner
maintenance time
MBNM 1 NM 5 NM 8 N
(KX-MB1520/KX-MB1530
only)
The unit will automatically activate for maintenance, once every 24 hours. This
function prevents toner from solidifying inside the cartridge. This function is
important to prevent a unit malfunction and the noise that the unit makes during
this sequence cannot be stopped. However if the timing of this sequence is
inconvenient, you can change the scheduled start time.
1. M Menu N A MBNM 1 NM 5 NM 8 N A M Set N
2. Enter the maintenance start time.
R The default time is “
12:00
” .
R If you selected 12-hour time entry (page 20), press MHN repeatedly to
select AM or PM.
R If you selected 24-hour time entry (page 20), the time is set using
24-hour time entry.
3. M Set N A M Menu N
Resetting all features (and
deleting all data in memory)
MBNM 1 NM 5 NM 9 N
Before you dispose of, transfer or return the product, activate this feature to
reset all programmable features and to delete all data stored in memory.
KX-MB1520/KX-MB1530 only: Phonebook (or caller information) and fax
transmission data (journal report and faxes received in memory) will be deleted.
M 0 N “
NO
” (default)
M 1 N “
YES
”
R Disconnect the telephone line cord (KX-MB1520/KX-MB1530 only) and
USB cable before activating this feature.
To reset all features:
1.
M Menu N A MBNM 1 NM 5 NM 9 N
2. Press M 1 N to select “
YES
” . A M Set N
3. Press M 1 N to select “
YES
” . A M Set N
Setting the ringer pattern
MBNM 1 NM 6 NM 1 N
(KX-MB1520/KX-MB1530
only)
M 1 N “
A
” (default)
M 2 N “
B
”
M 3 N “
C
”
Setting the beep sounds and
keytones
MBNM 1 NM 6 NM 5 N
M 0 N “
OFF
” : Deactivates this feature.
M 1 N “
ON
” (default): You will hear confirmation/error beep sounds and keytones.
Note:
R Even if this feature is set to “
OFF
” , the unit beeps in some cases. For
example:
– the memory reception alert setting (feature #437 on page 60) is
activated (KX-MB1520/KX-MB1530 only).
– the front cover is opened.
Setting the off-hook alert
MBNM 1 NM 7 NM 1 N
(KX-MB1520/KX-MB1530
only)
To alert you with a beeping sound when the telephone line has been left
off-hook for more than 1 minute without dialling.
M 0 N “
OFF
” : Deactivates this feature.
M 1 N “
ON
” (default): You have to press M Stop N or M SP-Phone N to stop the
beeping sound.
53
8. Programmable Features