19
Operating the built-in answering device
2
When receiving a call, a greeting message will be
played and the unit will record a voice message.
●
To record your own greeting message, see page 18.
Activating the answering device
Operating the answering device
from a remote location
1
Turn the
(Auto answer) light on by pressing
.
Listening to recorded messages
When new messages are recorded, the
(Auto
answer) light will flash.
1
Press
to listen to the recorded messages.
Listening to all of the recorded
messages
Erasing all of the recorded
messages
1
Press
(Menu) and
.
2
Press (Stop).
Erasing your own greeting
message
2
Press (Stop).
●
The pre-recorded Japanese greeting message will
be played when you receive a call.
Preparation: Programming the remote operation ID
1.
Press
(Menu) and
.
2.
Enter any 4-digit number (remote operation ID) except
or #.
3.
Press (Set).
4.
Press (Stop).
Operation: Listening to a recorded message from a
remote location
Turn the
(Auto answer) light on before you go out.
Remote operations are available only from a touch tone
telephone.
1.
Call your unit.
2.
Press
during the greeting message, then enter
the remote operation ID and
.
3.
Press
.
●
The recorded messages will be played back.
1
Press
(Menu) and
.
Press (Replay/Record).
2
To erase the messages, press
(Set) within
10 seconds after playing back.
To save the messages, press
(Stop).
To erase all the recorded messsages
, press
.
To stop playing back
, press
(Stop).
While a message is played back, the following
operations are available:
To listen to the next message
, press
(right).
To listen to the previous message
, press
(left).
To play back faster
, press
.
To play back slowly
, press
.
To erase the message being played back
, press
.
2
＃
＃
＃
