Secure the AC adaptor cord by
wrapping it around the hook.
Connect the AC adaptor to the
power outlet.
Note:
R
Use only the supplied Panasonic AC
adaptor PNLV236.
R
It takes about ten hours to fully
charge the battery.
R
The LED indicator lights in amber
while the battery is charging. When
charging is complete, the LED
indicator lights in green (page 8).
Note about power
connections
AC adaptor connection
R
The AC adaptor must remain
connected at all times. (It is normal
for the adaptor to feel warm during
use.)
R
The AC adaptor should be
connected to a vertically oriented or
floor-mounted AC outlet. Do not
connect the AC adaptor to a
ceiling-mounted AC outlet, as the
weight of the adaptor may cause it
to become disconnected.
Registering the
backup battery
This procedure is not required for
devices that were included as part of
a bundle.
Before you can use the backup battery,
it must be registered to the hub.
If you purchased devices separately
(i.e., not as part of a bundle), you must
register each device to the hub.
You can register each device by using
the registration buttons or the
[Home
Network]
app.
Using registration buttons
1
Hub:
Press and hold
M
OTHER
DEVICE
N
until the LED indicator
blinks in green.
2
Backup battery:
Press and hold
M
N
until the
LED indicator blinks in green
(page 8).
R
When registration is complete,
the hub sounds one long beep.
Note:
R
To cancel without registering the
backup battery, press
M
N
on the
hub and on the backup battery again.
R
If registration fails, the hub sounds
several short beeps.
10
For assistance, please visit www.panasonic.com/support
Setup
Shinsei_HNP100_(en_us)_0420_ver.000.pdf 10
2015/04/20 11:39:45
