Panasonic KX-HNL200, Руководство по установке

Страница: 8 / 20

Confirming the
usage conditions
Confirming the usage area
Wireless communication range
In optimal conditions, the wireless
communication range of each device in
the system from the hub is
approximately 50 m (160 feet) indoors
and approximately 300 m (1,000 feet)
outdoors.
R Wireless communication may be
reduced or unreliable when the
following obstacles are located
between the hub and other devices.
– Metal doors or screens
– Walls containing aluminum-sheet
insulation
– Walls made of concrete or
corrugated iron
– Double-pane glass windows
– Multiple walls
– When using each device on
separate floors or in different
buildings
R Wireless communication is reduced
by approximately xx% if the switch is
installed in a metal junction box.
R Wireless communication is reduced
by approximately xx% for each wall
located between the hub and the
switch.
R After the switch is installed and
registered to the hub, you can check
the switch’s communication status
by pressing
M N (page 7).
Usage area cautions
Using the switch in the following areas
may cause deformation, malfunction, or
operational failure.
R In direct sunlight
R Areas exposed to grease or steam,
such as kitchens
R Near fire or heating devices
R Near magnetic fields (such as near
microwaves and magnets)
R Areas subject to extreme
temperature changes, such as next
to air conditioners
R Areas with reflective objects, such
as glass, that can interfere with
detection of temperature variation
R Areas where the temperature is
affected by strong illuminating
objects (such as fluorescent lights)
R Near devices that emit strong radio
waves, such as mobile phones
Information about motion
sensor features
The switch utilizes an infrared sensor
(i.e., heat sensor) to detect motion. In
this document, this sensor is referred to
as a "motion sensor".
Please read the following information
before deciding where to install the
switch.
Note:
R The switch’s motion sensor features
are not designed to be used in
situations that require high reliability.
We do not recommend use of the
switch’s motion sensor features in
these situations.
R Panasonic takes no responsibility for
any injury or damage caused by the
use of the switch.
Using heat to detect motion
The switch’s motion sensor can detect
motion by recognizing temperature
differences that occur within the range
of the sensor. It does this by detecting
8 For assistance, please visit http://shop.panasonic.com/support
Setup