Specifications
R
Standards
DECT (Digital Enhanced Cordless
Telecommunications)
R
Frequency range
DECT: 1.88 GHz - 1.90 GHz
R
RF transmission power
DECT: Approx. 93 mW (average power per
channel)
R
Power source
220 – 240 V AC, 50/60 Hz
R
Power consumption
Standby: 2.3 W
During operation:
3.1 W (when the LED lights are not lit)
4.5 W (when the LED lights are lit)
R
Operating conditions
-20 °C – 50 °C
up to 90 % relative humidity
(non-condensing)
R
Transmitting range
Approx. 50 m indoors
Approx. 300 m outdoors
R
Image sensor
0.3 megapixel CMOS
R
Minimum illuminance required
0 lx
R
Focal length
Fixed (0.4 m – infinity)
R
Angular field of view (camera angle)
Horizontal: approx. 70°
Vertical: approx. 50°
R
Motion detection method
Pyroelectric infrared sensor (PIR sensor)
and visual sensor
R
PIR sensor detection range (when the
surrounding temperature is approx.
25 °C)
Horizontal: approx. 70°
Vertical: approx. 20°
Detection range: approx. 5 m
R
Visual sensor detection range
Horizontal: approx. 70°
Vertical: approx. 50°
R
IP rating
IP55
R
Adjustable mounting angles
Horizontal: ±90°
Vertical: facing forward - facing down
approx. 60°
(adjustable when mounting)
R
Dimensions (height
´
width
´
depth)
Approx. 75 mm
´
75 mm
´
173 mm
R
Mass (weight)
Approx. 305
g
*1 The IR-LED will be lighted at the low
illuminance conditions.
*2 Water resistance is only assured if the
camera is installed correctly according to
the instructions in the Installation Guide,
and appropriate water protection
measures are taken.
27
Appendix
HNC600AZ_(en_en)_0325_ver.040.pdf 27
2015/03/25 14:34:19