![background image](http://html.mh-extra.com/html/panasonic/kx-hn1053/kx-hn1053_information-and-troubleshooting-manual_277563008.webp)
CAUTION
• Never install wiring during a lightning storm.
• The AC adaptor is used as the main
disconnect device. Ensure that the AC outlet
is installed near the product and is easily
accessible.
• Place the product on the stable location
where the camera base can be adequately
supported when installing.
• Do not place the product on soft material.
It may fall down, break or cause injury.
• Do not place the product on the following
materials: gypsum board, ALC (autoclaved
lightweight cellular concrete), concrete block,
plywood less than 25 mm (1 inch) thick, etc
Installation and location
Note when using alkaline
batteries (not supplied) for power
backup
• Do not dispose of batteries in a fire.
• Remove all the batteries when replacing.
• Do not mix old, new or different types of
batteries.
• Remove the batteries if they become
unusable. There is a risk of leakage,
overheating, and rupture. Do not attempt to
use a battery if it is leaking.
• The unit and its batteries may become very
hot. Make sure the unit and batteries have
cooled before touching the unit, replacing
the batteries, etc.
For best performance
• This product uses radio waves to
communicate with a wireless router.
• For maximum coverage and noise-free
communications, place this product:
– at a convenient and central location with
no obstructions between this product and
the wireless router.
– away from electronic appliances such as
TVs, radios, personal computers, wireless
devices, or other phones.
–
facing away from radio frequency
transmitters, such as external antennas of
mobile phone cell stations (Avoid putting
this product near a window.)
• Coverage and transmission quality depends
on the local environmental conditions.
• If the transmission quality is not satisfactory,
move this product to another location.
Product location/avoiding
noise
Environment
• Keep the product away from electrical
noise generating devices, such as fluorescent
lamps and motors.
• The product should be kept free from
excessive smoke, dust, high temperature,
and vibration.
• Do not expose this product to direct sunlight
or other forms of powerful light such as
halogen lights for long periods of time.
(This may damage the image sensor.)
• Do not place heavy objects on top of the
product.
• When you leave the product unused for a
long period of time, unplug the product from
the power outlet.
•
CAUTION:
Risk of explosion if battery is
replaced by an incorrect type. Dispose of
used batteries according to the instructions.
• Do not open or mutilate the batteries.
Released electrolyte from batteries is
corrosive and may cause burns or injury to
the eyes or skin. The electrolyte is toxic and
may be harmful if swallowed.
• Exercise care when handling batteries. Do
not allow conductive materials such as rings,
bracelets, or keys to touch batteries,
otherwise a short circuit may cause the
batteries and/or the conductive material to
overheat and cause burns.
• The batteries should be used correctly,
otherwise the unit may be damaged due to
battery leakage.
• Do not charge, short-circuit, disassemble, or
heat the batteries.