Other materials (mortar, tile, etc.)
R
Do not use the included screws.
R
Consult the builder or licensed professional
regarding the type of anchor appropriate for
the installation location and materials.
R
Do not install on gypsum board or concrete
blocks.
Installing the front door camera
Attach the wall mounting adaptor to a porch
wall.
R
Secure the wall mounting adaptor to the
wall by tightening the 3 supplied screws
(
A
).
1
Remove the lock key of the button cover
(
B
) on the bottom of the camera.
2
Open the button cover (
C
).
3
Slide the power switch to ON (
D
).
R
When adjusting the installation angle
of the camera, use the spacer between
the wall mounting adaptor and wall as
necessary.
1
1
1
4
3
2
4
Close the button cover (
E
) and the lock
key (
F
). Attach the camera to the wall
mounting adaptor.
Note:
R
Make sure to close the button cover
securely. Water resistance cannot
be assured if the button cover is
open.
R
When attaching the camera to the wall
mounting adaptor, match the positions
of the hooks (
G
).
R
Rotate the camera until you hear a
click and the camera is securely
mounted.
7
7
7
7
6
5
Removing the front door camera
Rotate the camera away (
A
) from the wall,
and then pull it away (
B
) from the wall
mounting adaptor.
1
2
Installing the outdoor camera
1
Open the button cover (
A
), and then
slide the power switch to ON (
B
).
2
Secure the screw safety wire to the screw
hole (
C
) of the camera using a driver,
For assistance, please visit http://shop.panasonic.com/support
27
Setup
HN7001̲(en̲en)̲1228̲ver.030.pdf 27
2017/12/28 16:21:53
