compliant.
Find the Phone's IP Address
Find out your Panasonic phone IP Address.
Press the Status tab.
■
Press Network Status.
■
The IP address will be displayed on the display.
Reset to Factory Settings
This step is not required for brand new out-of-the-box phones, however, if the phone has been
already used then it is a must.
Open a new browser window and enter the phone's IP address in order to access the phone's
■
web administration interface login screen. Example: http://192.168.1.22.
Log in to the phone's web administration interface with the username and password. Please
■
note that the factory default login details are as follows: username is admin and password is
adminpass.
Click the Maintenance tab.
■
Click the Reset to Defaults section in the left navigation menu.
■
Click the Reset to Carrier Defaults button in order to factory reset the phone.
■
Wait some time for the phone to reboot.
■
NOTE:
Do not unplug or remove power to the phone while it is updating firmware and
configuration.
Registering Phone
This section describes how to identify the Panasonic phone model, requirements that must be
met and how to register the phone using manual configuration or auto provisioning.
The following topics are covered:
Manual Configuration
■
Auto Provisioning
■
Manual Configuration
This section describes how to set UAD settings, create a PBXware Extension, and register the
phone.
The following topics are covered:
UAD Settings
■
Creating an Extension
■
