![background image](http://html.mh-extra.com/html/panasonic/kx-hcm230/kx-hcm230_operating-instructions-manual_277550020.webp)
Operating Instructions
20
2.3
How to turn on Network Camera for
Installation
Connect the DC plug of the AC adaptor to the DC IN jack and a category 5 straight/
cross cable to the Ethernet port. Connect the AC plug of the AC adaptor to the
power outlet to turn on Network Camera. Pan/Tilt moves to the center position.
Notes
•
AC adaptor is used as the main disconnect device, so ensure that the
power outlet is located/installed near the equipment and is easily
accessible.
•
Use only the specified Panasonic AC adaptor PSLP1233 (Order No.
PSLP1233Z).
•
When you set up Network Camera in
[Type 3]
, connect it temporarily in
[Type 1]
,
[Type 2]
or
[Type 4]
.
•
When Indicator is orange, confirm that the Ethernet cable is properly
connected, or PC, Ethernet hub or broadband router is properly working.
DC IN
jack
AC adaptor
Power
Outlet
Ethernet
port
DC Plug
Category 5 straight/cross cable
To Network
Содержание KX-HCM230
