Panasonic KX-FT901CX-B, Руководство по обслуживанию

Страница: 41 / 183

·
There is something wrong with the unit.
[This error is displayed when the thermal head does not
warm up. Check the thermistor on the thermal head and
connector lead.]
· This message appears when the gear is not in an idle state.
Check the GEAR BLOCK and Handset JACK UNIT.
(Refer to GEAR SECTION (P.119).)
·
The cover is open. Close it.
·
The unit has run out of recording paper. Install a recording
paper
(Refer to RECORDING PAPER JAMS (P.20).)
· The document was not fed into the unit properly. Re-insert
the document. If misfeeding occurs frequently, clean the
document feeder rollers and try again.
(Refer to DOCUMENT FEEDER (P.21).)
· Attempted to transmit a document longer than 600 mm.
Press [STOP] to remove the document. Divide the
document into two or more sheets and try again.
[Alternately, turn off service code #559 to enable sending of
documents longer than 600 mm] (Refer to SERVICE
FUNCTION TABLE (P.43).)
· The memory (telephone numbers, parameters, etc.) has
been erased. Re-program.
·
There is no space to store new items in navigator directory.
Erase unnecessary items.
· The unit has a document in memory. See the other
displayed message instructions to print out the document.
·
When making a copy, the document being stored exceeds
the memory capacity of the unit. Press [STOP] to clear the
message. Divide the document into sections.
· The other partyís fax machine is busy or has run out of
recording paper. Try again.
·
A recording paper jam occurred. Clear the jammed paper.
(Refer to RECORDING PAPER (P.14).)
· The other partyís fax machine does not offer the polling
function. Check with the other party.
· The other party´s fax machine is busy or has run out of
recording paper. Try again.
·
The document is jammed. Remove the jammed document.
(Refer to DOCUMENT JAMS - SENDING (P.21).)
·
A transmission error occurred. Try again.
· The unit is too hot. Stop using the unit for a while and let the
unit cool down.
7.2. USER RECOVERABLE ERRORS
If the unit detects a problem, one or more of the following messages will appear on the display.
The explanations given in the [ ] are for servicemen only.
41
KX-FT901CX-B / KX-FT903CX-B / KX-FT901CX-W / KX-FT903CX-W / KX-FT901CX-S / KX-FT903CX-S