Setup
-23-
Setting your logo
The logo can be your company, division or
name.
1
Press
{
MENU
}
.
SYSTEM SET UP
2
Press
{
SET
}
.
PRESS[
()
]&[SET]
3
Press
{<}
or
{>}
until the following is
displayed.
YOUR LOGO
4
Press
{
SET
}
.
LOGO=
5
Enter your logo, up to 30 characters,
using the dial keypad. See page 24 for
details.
Example: “Bill”
1.
Press
{
2
}
2 times.
LOGO=B
L
The underbar shows a position of
the cursor.
2.
Press
{
4
}
6 times.
LOGO=Bi
3.
Press
{
5
}
6 times.
LOGO=Bil
4.
Press
{>}
to move the cursor to the
next space and press
{
5
}
6 times.
LOGO=Bill
6
Press
{
SET
}
.
L
The next feature will be displayed.
7
Press
{
MENU
}
.
Note:
L
You can enter your logo by pressing
{+}
or
{-}
in step 5. In this case, press
{>}
to move the cursor (see page 24 for
details).
To correct a mistake
Press
{<}
or
{>}
to move the cursor to the
incorrect character, and make the
correction.
To delete a character
Press
{<}
or
{>}
to move the cursor to the
character you want to delete and press
{
STOP
}
.
To insert a character
1.
Press
{<}
or
{>}
to move the cursor to
the position to the right of where you
want to insert the character.
2.
Press
{
MUTE
}
to insert a space and
enter the character.
{
MUTE
}
(Insert)
{
STOP
}
(Delete)
{
SET
}
{
MENU
}
{
FLASH
}
(Hyphen)
{+}
{-}
{<}
{>}
FT74-78HK.book Page 23 Friday, June 28, 2002 9:45 AM