Panasonic KX-FP85, Руководство по обслуживанию

Страница: 92 / 207

Code Function Set Value Effective
Range
Default Remarks
593 Time between CED and 300bps 1:75 msec
2:500 msec
3:1 sec 1~3 1 See Symptom/Countermeasure Table for long
distance and international calls in 2.3.5.1.5 THE
UNIT CAN COPY, BUT CANNOT EITHER
TRANSMIT/RECEIVE LONG DISTANCE OR
INTERNATIONL COMMUNICATIONS(P.51).
Refer to 2.3.5.1.3 RECEIVE PROBLEM(P.50) and
2.3.5.1.5 THE UNIT CAN COPY, BUT CANNOT
EITHER TRANSMIT/RECEIVE LONG DISTANCE
OR INTERNATIONL COMMUNICATIONS(P.51).
594 Overseas DIS detection select 1:detects at
the 1st time
2:detects at
the 2st time 1, 2 1 See Symptom/Countermeasure Table for long
distance and international calls in 2.3.5.1.5 THE
UNIT CAN COPY, BUT CANNOT EITHER
TRANSMIT/RECEIVE LONG DISTANCE OR
INTERNATIONL COMMUNICATIONS(P.51).
Refer to 2.3.5.1.2 SOMETIME THERE IS A
TRANSMIT PROBLEM(P.49) and 2.3.5.1.5 THE
UNIT CAN COPY, BUT CANNOT EITHER
TRANSMIT/RECEIVE LONG DISTANCE OR
INTERNATIONL COMMUNICATIONS(P.51).
595 Receive error limit value set X Number of
times 001~999 100 Sets the number of acceptable error lines when
the FAX reconstructs the received data. Refer to
2.3.5.1.3 RECEIVE PROBLEM(P.50).
596 Transmit level set X dBm - 15~00 10 Selects the FAX transmission level. Refer to
2.3.5.1.2 SOMETIME THERE IS A TRANSMIT
PROBLEM (P.49)and 2.3.5.1.3 RECEIVE
PROBLEM(P.50).
598 Receiving sensitivity 43= -43 dBm 20~48 43 Used when there is an error problem. Refer to
2.3.5.1.5 THE UNIT CAN COPY, BUT CANNOT
EITHER TRANSMIT/RECEIVE LONG DISTANCE
OR INTERNATIONL COMMUNICATIONS(P.51).
599 ECM frame size 1:256 2:64 1, 2 1 ----------
602 Warning LIST Printing 1:ON 2:OFF 1, 2 1 Used to print a caution list when setting the
TEL/FAX mode and ring detection.
717 Transmit speed selection 1:9600BPS
2:7200BPS
3:4800BPS
4:2400BPS 1~4 1 Adjusts the speed to start training during FAX
transmission. Refer to 2.3.5.1.2 SOMETIME
THERE IS A TRANSMIT PROBLEM (P.49)and
2.3.5.1.6 THE UNIT CAN COPY, BUT THE
TRANSMISSION AND RECEPTION IMAGE ARE
INCORRECT(P.53).
718 Receive speed selection 1:9600BPS
2:7200BPS
3:4800BPS
4:2400BPS 1~4 1 Adjusts the speed to start training during FAX
reception. Refer to 2.3.5.1.3 RECEIVE
PROBLEM(P.50) and 2.3.5.1.6 THE UNIT CAN
COPY, BUT THE TRANSMISSION AND
RECEPTION IMAGE ARE INCORRECT(P.53).
719 Ringer off in TEL/FAX mode 1:ON 2:OFF 1, 2 1 Selects the ringer switch off when a call is
received in the TEL/FAX mode.
721 Pause tone detect 1:ON 2:OFF 1, 2 1 Selects the tone detection for pause in dialing.
722 Redial tone detect 1:ON 2:OFF 1, 2 2 Sets the tone detection mode after redialing.
731 CPC mode 1:A 2:B 3:OFF 1~3 1 Sets the CPC signal detection mode from the
converter.
732 AUTO disconnect cancel time 1:350 ms
2:1.8 sec
3:OFF 1~3 1 “Set to “2” when the auto disconnect circuit
operates and cuts the line.”
745 Power ON film feed 1:ON 2:OFF 1, 2 1 When the power is turned on, the film is wound to
take up any slack.
763 CNG detect time for friendly
reception 1:10 sec
2:20 sec
3:30 sec 1~3 3 Selects the CNG detection tone of friendly
reception.
771 T1 timer 1:35 sec
2:60 sec 1, 2 1 Sets a higher value when the response from the
other party needs more time during FAX
transmission.
774 T4 timer X 100 msec 00~99 0 Use this function when delay occurs in the line
and communication (ex. Mobile comm) does not
work well.
775 Monitoring of message transfer 1:ON 2:OFF 1, 2 2 If set to ON a message can be monitored from
this unit´s SP-PHONE when transferring a
message.
784 Voice prompt test You can hear the voice prompt from speaker after
pressing “START” key.
815 Sensor & Vox check See 2.5 TEST FUNCTIONS(P.103).
841 Digital SP-phone check See 2.3.8 DIGITAL SPEAKERPHONE(P.79).
852 Print test pattern See 2.5 TEST FUNCTIONS(P.103).
853 Top margin 1~9 -------- ----------
854 Left margin 1~8 -------- ----------
92
KX-FP85