35
Sending Faxes
Programming the stations in the broadcast memory
1
Press
twice.
Display:
2
Press
.
3
Rotate
until the desired name
is displayed.
Example:
4
Press
.
●
To program other stations, repeat steps 3
and 4 (up to 20 stations).
5
Press
after programming all of the
desired stations.
6
Press
to exit the program.
STOP
PRESS DIR.PROG.
USE EASYDIAL OR
REGISTERED
SET
DIR=John
[001]
SET
John
[000]
EASY DIAL
DIR=
[000]
SET
PRESS SET
BROADCAST
DIRECTORY PROGRAM
SET
STOP
DIRECTORY PROGRAM
Display
EASY DIAL
Note:
●
If you enter the wrong station, press
after step 4 to erase the station.
●
Confirm the stored numbers by printing a
broadcast programming list (p. 85).
STOP
Broadcast transmission to pre-programmed
parties
!
This feature is useful for sending the same document often to selected parties whose fax
numbers are stored in the EASY DIAL directory. First program the parties (see below) then see
page 37 for transmission.
Before programming, make sure that the desired stations have been stored in the EASY
DIAL directory (p. 20).