Panasonic KX-FL612CX, Руководство по обслуживанию

Страница: 62 / 266

6.2.3. SERVICE FUNCTION TABLE
Code Function Set Value Effective
Range
Default Remarks
501 Pause time set X 100 msec 001~600 030 ----------
502 Flash time X 10 ms 01~99 70 ----------
514 Bell signal detect time X 100msec 1~9 3 ----------
520 CED frequency select 1:2100 Hz
2:1100 Hz 1, 2 1 See Symptom/Countermeasure Table for long
distance and international calls in (P.118).
521 International mode select 1:ON 2:OFF 1, 2 1 See Symptom/Countermeasure Table for long
distance and international calls in (P.118).
522 Auto standby select 1:ON 2:OFF 1, 2 1 The resolution reverts to the default when
transmission is complete.
523 Receive equalizer select 1: 0 km
2: 1.8 km
3: 3.6 km
4: 7.2 km 1~4 1 Set RX equalizer to automatic mode.
524 Transmission equalizer select 1: 0 km
2: 1.8 km
3: 3.6 km
4: 7.2 km 1~4 1
529 Call Service Clear
544 Document feed position adjustment
value set X mm 0~4 2 If it is difficult to feed documents, raise the set
value. If multi documents feed occurs, lower the
set value.
550 Memory clear. See (P.64).
551 ROM check See (P.64).
552 DTMF single tone test 1:ON 2:OFF 1, 2 2 See (P.64).
553 Monitor on FAX communication
select 1:OFF
2:PHASE B
3:ALL 1~3 1 Sets whether to monitor the line signal with the
unit´s speaker during FAX communication or not.
554 Modem test See (P.64).
555 Scan check See (P.64).
556 Motor test 0 See (P.64).
557 LED test See (P.64).
558 LCD test See (P.64).
561 KEY test See (P.64).
571 ITS auto redial time set X number of
times 00~99 05 Selects the number of times that ITS is redialed
(not including the first dial).
572 ITS auto redial line disconnection
time set X second 001~999 065 Sets the interval of ITS redialing.
573 Remote turn-on ring number set X number of
rings 01~99 10 Sets the number of rings before the unit starts to
receive a document in the TEL mode.
590 FAX auto redial time set X number of
times 00~99 05 Selects the number of redial times during FAX
communication (not including the first dial).
591 FAX auto redial time disconnection
time set X second 001~999 065 Sets the FAX redial interval during FAX
communication.
592 CNG transmit select 1:OFF
2:ALL
3:AUTO 1~3 2 Lets you select the CNG output during FAX
transmission. ALL: CNG is output at phase A.
AUTO: CNG id output only when automatic dialing
is performed. OFF: CNG id not output at phase A.
Refer to (P.111).
593 Time between CED and 300bps 1:75 msec
2:500 msec
3:1 sec 1~3 1 See Symptom/Countermeasure Table for long
distance and international calls in (P.118). Refer
to (P.112) and (P.118).
594 Overseas DIS detection select 1:detects at
the 1st time
2:detects at
the 2st time 1, 2 1 See Symptom/Countermeasure Table for long
distance and international calls in (P.118). Refer
to (P.111) and (P.118).
595 Receive error limit value set 1: 5%
2: 10%
3: 15%
4: 20% 1~4 2 If the number of errors during transmission
exceeds this value, the sending side terminates
the call.
596 Transmit level set X dBm - 15~00 11 Selects the FAX transmission level. Refer to
(P.111)and (P.112).
598 Receiving sensitivity 43= -43 dBm 20~48 41 Used when there is an error problem. Refer to
(P.118).
599 ECM frame size 1:256 2:64 1, 2 1 ----------
628 H.V.P.S. check See (P.64).
62
KX-FL612CX / KX-FL612CX-S