Code
Display & Feature
Settings
How the unit operates
Features Summary
67
(The default setting is in bold type.)
See page 47 for details.
#70
If you have a pager and wish to
know when your unit receives a fax
or an incoming message, activate
this feature.
PAGER CALL
ON
OFF
#68
ECM stands for Error Correction
Mode. To send a fax even if there
is static interference on the
telephone line.
ECM SELECTION
ON
OFF
This feature is available when the
transmitting/receiving stations are
ECM compatible.
●
If documents are in memory, clear
them before making the setting
(p. 42).
#77
To change the receive mode in the
AUTO ANSWER setting.
AUTO ANSWER
TAD/FAX
FAX ONLY
TEL/FAX
“TAD/FAX”: Telephone Answering
Device/Facsimile mode(p. 50)
“FAX ONLY”: Facsimile only mode
(p. 43)
“TEL/FAX”: Telephone/Facsimile
mode (p. 44, 45)
ON
OFF
#78
If you use an extension telephone
in TEL/FAX mode, select the
desired number of rings of the
extension telephone.
TEL/FAX RING
1, 2, 3, 4
#80
To reset on advanced features to
their default settings.
SET DEFAULT
YES
NO
See pages 44 and 45 for details.
1. Follow steps 1–3 on page 66.
2. Rotate
to select
“YES”.
3. Press
.
4. Press
again.
5. Press
.
MENU
SET
SET
JOG DIAL
#79
To save on toner consumption.
TONER SAVE
“ON”: The toner cartridge will last
longer.
●
This feature may reduce print
quality.
You can confirm the status of the
other party’s machine.
●
If the ring back tone continues, the
other party’s machine may not be a
facsimile or may have run out of
paper. Check with the other party.
●
The connecting tone volume
cannot be adjusted.
#76
If you often have trouble when
sending a fax, this feature allows
you to hear connecting tones: fax
tone, ring back tone and busy tone.
CONNECTING TONE
ON
OFF
See page 35 for details.
#75
To apply to the NetMoves Global
Fax Network and activate the IQ-
FAX function.
IQ-FAX
ON
OFF