4
4
Installations and connections
When the unit runs out of ink film, the following message will be displayed.
Install a new ink film.
Installing the ink film
2
Open the back cover.
1
Open the control panel.
Insert the orange
gear into the left slot
of the main unit.
Insert the white
gear into the right slot
of the main unit.
4
If the ink film is slack, tighten it by
winding this gear (orange).
3
Insert the ink film.
Flat white surface
Glass
6
Close the control panel.
5
Close the back cover pressing
“ ” down on both sides
until it clicks into place.
Replacement ink film:
KX-FAN190
(15 m)
¥
714
KX-FAN190W
(15 m X 2)
¥
1,208
KX-FAN191
(15 m) (*1)
¥
893
KX-FAN191W
(15 m X 2) (*1)
¥
1,523
・
As of January 2011.
・
Tax included.
*1 KX-FAN191/KX-FAN191W leaves a fainter print trail on the film
than does the KX-FAN190/190W.
フィルムなし U23
交換してください
品番:KX−FAN190
・
Do not place the ink film on the back side of
the control panel. Any ink adhering to the glass
or flat white surface may cause black or white
lines to appear on the recording paper or the
recipient's fax.
KX-PW721̲QG.indb 4
KX-PW721̲QG.indb 4
2010/12/22 16:48:31
2010/12/22 16:48:31