Connections and Setup
17
For Fax Advantage assistance, call 1-800-435-7329.
How to set up
1
Set the fax machine to FAX ONLY mode by
pressing
{
RECEIVE MODE
}
until the
following is displayed.
L
The display will show the number of
rings before the fax machine answers a
call in FAX ONLY mode.
2
Press
{+}
or
{-}
to change the ring
setting to 5 and press
{
SET
}
.
3
Turn on your answering machine.
4
Adjust a ring setting of the answering
machine less than 4.
L
This will allow the answering machine to
answer the call first.
How to receive calls
At first your answering machine will pick up the
call.
L
If the call is a phone call, the answering
machine will record voice message
automatically.
L
If a fax calling tone is detected, the answering
machine will be disconnected and the call will
be switched to the fax machine. The fax
machine will receive a fax automatically.
If the answering machine is turned off
The fax machine will ring 5 times and receive a
fax automatically.
With the fax machine
1.
When the fax machine rings, lift the handset
of the fax machine.
2.
When document reception is required, a fax
calling tone (slow beep) is heard, or no sound
is heard, press
{
FAX/START
}
.
3.
Replace the handset.
L
The fax machine will start reception.
With an extension telephone
1.
When the extension telephone rings, lift the
handset of the extension telephone.
2.
When document reception is required, a fax
calling tone (slow beep) is heard, or no sound
is heard, press
{*}{#}{
9
}
(pre-selected fax
activation code)
firmly
.
3.
Replace the handset.
L
The fax machine will start reception.
Note:
L
You can change the fax activation code in
feature #41 (page 62).
{
SET
}
{
FAX/START
}
{+}{-}
{
RECEIVE MODE
}
FAX
TEL
FAX ONLY MODE
3 RINGS