Panasonic KX-FC971CX-S, Руководство по обслуживанию

Страница: 48 / 220

7.3.3. SERVICE FUNCTION TABLE
Code Function Set Value Effective
Range
Default Remarks
501 Pause time 1:SHORT (3S)
2:LONG (5S) 1, 2 1 ----------
502 Flash time 1:Type1
2:Type2
3:Type3 1, 2, 3 2 1: 100 ms 2: 600 ms 3: 300 ms
511 VOX sense 1:High 2:Low 1, 2 1 When the TAM (or EXT TAM) does not stop recording
the ICM because noise is detected on the telephone
line, change this setting to "LOW".
514 Bell detection time X 10 msec 10~90 60 ----------
520 CED frequency select 1:2100 Hz
2:1100 Hz 1, 2 1 See Symptom/Countermeasure Table for long
distance and international calls in The unit can copy,
but cannot transmit/receive (P.74).
521 International mode select 1:ON 2:OFF 1, 2 1 See Symptom/Countermeasure Table for long
distance and international calls in The unit can copy,
but cannot transmit/receive (P.74).
522 Auto standby select 1:ON 2:OFF 1, 2 1 The resolution reverts to the default when
transmission is complete.
523 Receive equalizer select 1: 0 km
2: 1.8 km
3: 3.6 km
4: 7.2 km 1~4 1 When the telephone station is far from the unit or
reception cannot be performed correctly, adjust
accordingly.
524 Transmission equalizer select 1: 0 km
2: 1.8 km
3: 3.6 km
4: 7.2 km 1~4 1 When the telephone station is far from the unit or
transmission cannot be performed correctly, adjust
accordingly.
544 Document feed position adjustment
value set 1: 3 mm
2: 4 mm
3: 5 mm
4: 6 mm
5: 7 mm 1~5 3 If it is difficult to feed documents, raise the set value.
If multi documents feed occurs, lower the set value.
550 MEMORY CLEAR See Memory Clear Specification(P.49).
551 ROM check See TEST FUNCTIONS(P.50).
553 Monitor on FAX communication select 1:OFF
2:PHASE B
3:ALL
1~3 1 Sets whether to monitor the line signal with the unit´s
speaker during FAX communication or not.
554 Modem test See TEST FUNCTIONS(P.50).
555 Scan check See TEST FUNCTIONS(P.50).
556 Motor test 0 See TEST FUNCTIONS(P.50).
557 LED test See TEST FUNCTIONS(P.50).
558 LCD test See TEST FUNCTIONS(P.50).
559 Document jam detection select 1:ON 2:OFF 1, 2 1 See TEST FUNCTIONS(P.50).
561 KEY test See TEST FUNCTIONS(P.50).
562 Cutter test Press “SET” key.
570 BREAK % select 1:61% 2:67% 1, 2 1 Sets the % break of pulse dialing according PBX.
571 ITS auto redial time set X number of
times 00~99 05 Selects the number of times that ITS is redialed (not
including the first dial).
572 ITS auto redial line disconnection time
set X second 001~255 065 Sets the interval of ITS redialing.
573 Remote turn-on ring number set X number of
rings 01~99 10 Sets the number of rings before the unit starts to
receive a document in the TEL mode.
590 FAX auto redial time set X number of
times 00~99 05 Selects the number of redial times during FAX
communication (not including the first dial).
591 FAX auto redial time disconnection
time set X second 001~999 065 Sets the FAX redial interval during FAX
communication.
592 CNG transmit select 1:OFF
2:ALL
3:AUTO 1~3 2 Lets you select the CNG output during FAX
transmission. ALL: CNG is output at phase A. AUTO:
CNG id output only when automatic dialing is
performed. OFF: CNG id not output at phase A. Refer
to Sometime there is a transmit problem(P.72).
593 Time between CED and 300bps 1:75 msec
2:500 msec
3:1 sec 1~3 1 See Symptom/Countermeasure Table for long
distance and international calls in The unit can copy,
but cannot transmit/receive (P.74). Refer to
Receive Problem(P.73) and The unit can copy, but
cannot transmit/receive (P.74).
594 Overseas DIS detection select 1:detects at
the 1st time
2:detects at
the 2nd time
1, 2 1 See Symptom/Countermeasure Table for long
distance and international calls in The unit can copy,
but cannot transmit/receive (P.74). Refer to
Sometime there is a transmit problem(P.72) and
The unit can copy, but cannot transmit/receive
(P.74).
48
KX-FC971CX-S / KX-FGA521CX-S