Panasonic KX-FB423CN, Руководство пользователя

Страница: 266 / 415

6.2.3. SERVICE FUNCTION TABLE
Code Function Set Value Effective
Range
Default Remarks
501 Pause time set X 100 msec 001~600 30 ----------
502 Flash time X 10 ms 01~99 70 ----------
503 Dial speed select 1:10 pps 2:20
pps 1, 2 1 ----------
520 CED frequency select 1:2100 Hz
2:1100 Hz 1, 2 1 ----------
521 International mode select 1:ON 2:OFF 1, 2 1 ----------
522 Auto standby select 1:ON 2:OFF 1, 2 1 The resolution reverts to the default when
transmission is complete.
523 Receive equalizer select 1: 0 km
2: 1.8 km
3: 3.6 km
4: 7.2 km 1~4 1 When the telephone station is far from the unit or
reception cannot be performed correctly, adjust
accordingly.
524 Transmission equalizer select 1: 0 km
2: 1.8 km
3: 3.6 km
4: 7.2 km 1~4 1 When the telephone station is far from the unit or
transmission cannot be performed correctly, adjust
accordingly.
550 Memory clear: To reset the value to the default one, except the top margin
(853). "START" input
551 ROM check See TEST FUNCTIONS (P.57).
552 DTMF single tone test 1:ON 2:OFF 1, 2 2 See TEST FUNCTIONS (P.57).
553 Monitor on FAX communication
select 1:OFF
2:PHASE B
3:ALL 1~3 1 Sets whether to monitor the line signal with the
unit´s speaker during FAX communication or not.
554 Modem test See TEST FUNCTIONS (P.57).
555 Scan check See TEST FUNCTIONS (P.57).
556 Motor test 0 See TEST FUNCTIONS (P.57).
557 LED test See TEST FUNCTIONS (P.57).
558 LCD test See TEST FUNCTIONS (P.57).
559 Document jam detection select 1:ON 2:OFF 1, 2 1 See DOCUMENT JAMS - SENDING (P.27).
561 KEY test See TEST FUNCTIONS (P.57).
570 BREAK % select 1:61% 2:67% 1, 2 1 Sets the % break of pulse dialing according PBX.
571 ITS auto redial time set X number of
times 00~14 05 Selects the number of times that ITS is redialed
(not including the first dial).
572 ITS auto redial line disconnection
time set X second 001~999 065 Sets the interval of ITS redialing.
573 Remote turn-on ring number set X number of
rings 01~99 10 Sets the number of rings before the unit starts to
receive a document in the TEL mode.
590 FAX auto redial time set X number of
times 00~14 05 Selects the number of redial times during FAX
communication (not including the first dial).
591 FAX auto redial time disconnection
time set X second 001~999 065 Sets the FAX redial interval during FAX
communication.
592 CNG transmit select 1:OFF
2:ALL
3:AUTO 1~3 2 Lets you select the CNG output during FAX
transmission. ALL: CNG is output at phase A.
AUTO: CNG id output only when automatic dialing
is performed. OFF: CNG id not output at phase A.
Refer to SOMETIME THERE IS A TRANSMIT
PROBLEM (P.84).
593 Time between CED and 300bps 1:75 msec
2:500 msec
3:1 sec 1~3 1 ----------
594 Overseas DIS detection select 1:detects at
the 1st time
2:detects at
the 2st time 1, 2 1 ----------
595 Receive error limit value set X Number of
times 001~999 100 Sets the number of acceptable error lines when
the FAX reconstructs the received data. Refer to
RECEIVE PROBLEM (P.85).
596 Transmit level set X dBm - 15~00 -10 Selects the FAX transmission level. Refer to
SOMETIME THERE IS A TRANSMIT PROBLEM
(P.84) and RECEIVE PROBLEM (P.85).
598 Receiving sensitivity 43= -43 dBm 20~48 40 Used when there is an error problem.
599 ECM Frame size 1:256 / 2:64 1,2 1 ----------
717 Transmit speed selection 1:14400BPS
2:12000BPS
3:9600BPS
4:7200BPS
5:4800BPS
6:2400BPS 1~6 1 Adjusts the speed to start training during FAX
transmission. Refer to SOMETIME THERE IS A
TRANSMIT PROBLEM (P.84).
55
KX-FB423CN