10
1
A
Open the back lid by lifting up the tabs
located on both sides.
B
Install a recording paper roll in the main
unit.
¡
Make sure that the shiny side of the
paper is facing down and there is no
slack, tape, or glue residue on the paper
roll.
Note:
¡
Only use the included roll of paper or specified recording paper, or else the print quality may be affected
and/or excessive thermal head wear may occur.
¡
The beginning of some recording paper rolls are secured with glue or tape.
Cut approximately 150 mm (6 inches) from the new roll of paper prior to installation.
¡
To order recording paper, see page 67.
A
B
2
Insert the leading edge of the recording paper
between the recording paper roller and the
silver plate.
3
Close the back lid by gently pressing down
on both ends.
correct
incorrect
Recording paper roller
Silver plate
Tab
Installing your unit
Installing the recording paper