Panasonic KV-S8147 Скачать руководство пользователя страница 49

Страница: 49 / 104

7.2.3 Using Manual feeding

When using manual feeding, the documents are scanned without separation. Place the documents on the
feed tray one by one.

•

Manual feeding is recommended to scan important documents or bound documents.

•

Automatic feeding is recommended for normal use.

•

For details about operation panel, refer to "5 Operation Panel" (page 20).

Using manual feeding

Press the Manual feed button (

) for 1 second or more.

•

Manual feed LED (Green) turns ON.

•

The feed tray will move up.

Note

•

Double feed detection is not available when using manual feeding.

•

Minimum length of documents is 110 mm (4.33 in.) when using manual feeding. (KV-S8127 only)

•

When manual feeding is set, you cannot change the position of the feed tray because the feed tray is
fixed at the uppermost stage. Exit tray capacity is 100 sheets

When manual feeding is OFF (automatic feeding), exit tray capacity is 750 sheets (80 g/m² [21 lb.] / High-quality woodfree
paper).

Switching back to automatic feeding

Press the Manual feed button (

) for 1 second or more.

•

Manual feed LED (Green) turns OFF.

•

The feed tray will move down.

7.2.3 Using Manual feeding

Содержание KV-S8147









































































































Результаты поиска

Содержание KV-S8147

Отзывы:

Бренды по названию

Популярные бренды

Panasonic KV-S8147, Руководство по эксплуатации

Результаты поиска

Содержание KV-S8147

Отзывы:

Бренды по названию

Популярные бренды