6.
Place the documents on the hopper (
A
) with the scanning side facing up.
•
Align the document position so that the center of the smallest sheet will be fed to the center of the paper
feed roller (
B
). If the document is not properly aligned, the pages will not be fed correctly.
2
1
2
3
Notice
•
The height of the documents should not exceed the limit mark (
C
) on the document guide. This
may cause a paper jam or skew.
•
Depending on the types of paper, the document may not be fed smoothly. In such case, reduce
the number of sheets of the document.
Operating Manual
33
Operation
