Panasonic KMF0209634C2, Руководство по обслуживанию

Страница: 90 / 112

http://servis-manual.com/
3.5.4.2 KX-FM90HG-W
TOP PREVIOUS NEXT
Code Function Set Value Effective
Range
Default Remarks
002 Your logo ---------- ---------- ---------
-
Refer to KX-FM90CE-W (for Czech) / KX-FM90HG-W ()
003 Your fax number ---------- ---------- ---------
-
Refer to KX-FM90CE-W (for Czech) / KX-FM90HG-W ()
501 Pause time set X 100 msec 001~600 030 ----------
502 Flash time X 10 ms 01~99 10 ----------
503 Dial speed select 1:10 pps 2:20
pps 1, 2 1 ----------
510 VOX time 1:8 sec 2:6sec
3: 4sec 1, 2 2 ----------
511 VOX sense 1:High 2:Low 1, 2 1 When the TAM (or EXT TAM) does not stop recording the ICM because noise is
detected on the telephone line, change this setting to "LOW".
512 Vox mode 1:ON 2:OFF 1, 2 1 ----------
520 CED frequency
select
1:2100 Hz
2:1100 Hz 1, 2 1 See Symptom/Countermeasure Table for long distance and international calls in THE
UNIT CAN COPY, BUT CANNOT EITHER TRANSMIT/RECEIVE LONG
DISTANCE OR INTERNATIONLCOMMUNICATIONS
/ ().
521 International mode
select
1:ON 2:OFF 1, 2 1 See Symptom/Countermeasure Table for long distance and international calls in THE
UNIT CAN COPY, BUT CANNOT EITHER TRANSMIT/RECEIVE LONG
DISTANCE OR INTERNATIONLCOMMUNICATIONS
/ ().
522 Auto standby select 1:ON 2:OFF 1, 2 1 The resolution reverts to the default when transmission is complete.
523 Receive equalizer
select
1:0 km 2:1.8
km 3:3.6 km
4:7.2 km 1~4 1 When the telephone station is far from the unit or reception cannot be performed
correctly, adjust accordingly.
524 Transmission
equalizer select
1:0 km 2:1.8
km 3:3.6 km
4:7.2 km 1~4 1 When the telephone station is far from the unit or transmission cannot be performed
correctly, adjust accordingly.
533 Setting the number
of times that
massage transfer is
redialed.
00~99 00~99 03 Selects the number of times that message transfer is redialed (not including the first
dialing).
534 Setting the massage
transfer/pager call
redial interval
001~999 sec 001~999 065 Sets the interval of message transfer/pager call redial.
550 Memory clear: To reset the value to the default one, except
the top margin (853) and left margin (854).
Turn OFF and ON the power switch to operate correctly.
551 ROM check See TEST FUNCTIONS ().
552 DTMF single tone
test
1:ON 2:OFF 1, 2 2 See TEST FUNCTIONS ().
553 Monitor on FAX
communication
select
1:OFF
2:PHASE B
3:ALL 1~3 1 Sets whether to monitor the line signal with the unit´s speaker during FAX
communication or not.
554 Modem test See TEST FUNCTIONS ().
555 Scan check See TEST FUNCTIONS ().
556 Motor test 0 See TEST FUNCTIONS ().
557 LED test See TEST FUNCTIONS ().
558 LCD test See TEST FUNCTIONS ().
559 Document jam
detection select
1:ON 2:OFF 1, 2 1 See DOCUMENT JAMS ().
561 KEY test See TEST FUNCTIONS ().
570 BREAK % select 1:61% 2:67% 1, 2 2 Sets the % break of pulse dialing according PBX.
571 ITS auto redial time
set
X number of
times 00~99 05 Selects the number of times that ITS is redialed (not including the first dial).
572 ITS auto redial line
disconnection time
X second 001~999 065 Sets the interval of ITS redialing.
Stránka
č
. 1 z 3
27. 10. 2004 file://C:\Documents%20and%20Settings\Admin\Plocha\SCHÉMATA\VIDEA\PAN...