PAN9028 Wi-Fi/Bluetooth Module
4 Basic Usage
Quick Start Guide Rev. 1.0
Page 19 of 34
3. Press on the entry to connect to the PAN9028 (1).
Usually the PAN9028 will show up as
OpenSynergy A2DP Application
.
➔
The connection will be established and is shown as
Connected
(1). This takes
approximately a couple of seconds.
➔
Now any audio that is played back on the Android device, will be routed to the
PAN9028 instead and output on the audio jack of the PAN9028-IMX.
Depending on the connected headphones, the volume might need to be
adjusted to a different level.
For instructions on how to control the volume please refer to
