PAN9028 Wi-Fi/Bluetooth Module
10 Regulatory and Certi
Module Integration Guide Rev. 1.0
Page 42 of 45
b) The radio interfaces which, in accordance with implementing acts adopted pursuant to
paragraph 2 of this Article, correspond to radio equipment which can be put into service
and used without restrictions within the Union.
2) The Commission shall adopt implementing acts establishing the equivalence between
notified radio interfaces and assigning a radio equipment class, details of which shall be
published in the Official Journal of the European Union. Those implementing acts shall be
adopted in accordance with the examination procedure referred to in Article 45(3).
The Radio Interface Specifications Templates are provided for information in the EFIS database
for applications which use is in harmonised radio spectrum, however with restrictions.
10.3.2 Equipment Classes
The PAN9028 is a radio module classified as class-1 or class-2 radio equipment depending on
the frequency band in which it can operate. This equipment class is passed on the end-product
which integrates the module.
Class 1
Class 1 radio equipment can be placed on the market and put into service without restrictions
according to Article 1(3) of Commission Decision 2000/299/EC (Version 2018-01).
This radio module is defined as Class 1 radio equipment when it is restricted to operate in the
following frequency bands:
Sub-class
of Class 1
Application/Reference
Frequency Band
(MHz)
Transmit Power/Power Density
22
Wideband Data
Transmission Systems
EN 300 328
2 400 to 2 483.5
100 mW e.i.r.p and 100 mW/100 kHz
e.i.r.p. density applies when frequency
hopping modulation is used, 10 mW/MHz
e.i.r.p. density applies when other types of
modulation are used.
43
Non-Specific Short Range
Devices
EN 300 440
5 725 to 5 875
25 mW e.i.r.p.
Class 2
Class 2 radio equipment are restricted in accordance with Article 1(3) of Commission Decision
2000/299/EC1 if the equipment falls within the scope of Class 2.
This radio module is also defined as Class 2 radio equipment when it is restricted to operate in
the following frequency bands:
