Panasonic i-Pro WV-SW355 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 52

background image

13

• When some SDHC/SD memory cards are

used with this product, the product may
not work properly or performance deterio-
ration may be caused. Use the SDHC/SD
memory cards recommended in page 47.

Code label

The code labels (accessory) are required at
inquiry for trouble. Use caution not to lose
these labels. It is recommended to paste one
of the labels onto the CD-ROM case.

Discoloration on the color filter of the
MOS image sensor

• When continuously shooting a bright light

source such as a spotlight, the color filter
of the MOS image sensor may have deteri-
orated and it may cause discoloration.
Even when changing the fixed shooting
direction after continuously shooting a
spotlight for a certain period, the discolor-
ation may remain.

• When shooting fast-moving subjects or

performing panning/tilting operations,
objects crossing the shooting area may
look to be bending askew.

MPEG-4 Visual Patent Portfolio License

This product is licensed under the MPEG-4
Visual Patent Portfolio License for the personal
and non-commercial use of a consumer for (i)
encoding video in compliance with the MPEG-
4 Visual Standard ("MPEG-4 Video") and/or (ii)
decoding MPEG-4 Video that was encoded by
a consumer engaged in a personal and non-
commercial activity and/or was obtained from a
video provider licensed by MPEG LA to provide
MPEG-4 Video. No license is granted or shall
be implied for any other use. Additional infor-
mation including that relating to promotional,
internal and commercial uses and licensing
may be obtained from MPEG LA, LLC.
See http://www.mpegla.com.

AVC Patent Portfolio License

THIS PRODUCT IS LICENSED UNDER THE
AVC PATENT PORTFOLIO LICENSE FOR THE
PERSONAL USE OF A CONSUMER OR
OTHER USES IN WHICH IT DOES NOT
RECEIVE REMUNERATION TO (I) ENCODE
VIDEO IN COMPLIANCE WITH THE AVC
STANDARD (“AVC VIDEO”) AND/OR (II)
DECODE AVC VIDEO THAT WAS ENCODED
BY A CONSUMER ENGAGED IN A PERSONAL
ACTIVITY AND/OR WAS OBTAINED FROM A
VIDEO PROVIDER LICENSED TO PROVIDE
AVC VIDEO. NO LICENSE IS GRANTED OR
SHALL BE IMPLIED FOR ANY OTHER USE.
ADDITIONAL INFORMATION MAY BE
OBTAINED FROM MPEG LA, L.L.C.
SEE http://www.mpegla.com.

Indication label

Refer to the indication label placed on the bot-
tom of this product for the equipment classifi-
cation and power source, etc.

About the dehumidifying device

• This product has dehumidifying device to

keep the inside at low moisture level, pre-
venting condensation and quickly dissipat-
ing dew if produced.

• Dew may be produced depending on the

conditions of temperature, humidity, winds,
and rain, and it may take time to dehumidi-
fy.

• Never seal the surfaces of the dehumidify-

ing device.

Dehumidifying device

«
...
11
12
13
14
15
...
»

Содержание i-Pro WV-SW355





















































Отзывы:

Нет отзывов

Похожие инструкции для i-Pro WV-SW355

Бренд: D-Link Страницы: 72

Бренд: D-Link Страницы: 73

Бренд: D-Link Страницы: 12

Бренд: D-Link Страницы: 12

Бренд: D-Link Страницы: 67

Бренд: D-Link Страницы: 24

Бренд: D-Link Страницы: 12

Бренд: D-Link Страницы: 2

DCS-2121 - SECURICAM Network Camera

Бренд: D-Link Страницы: 68

DCS-1110 - Network Camera

Бренд: D-Link Страницы: 16

Бренд: YESKAMO Страницы: 28

Gemini GEM-X255

Бренд: NAPCO Страницы: 40

Бренд: NAPCO Страницы: 16

Бренд: NAPCO Страницы: 6

Бренд: Comelit Страницы: 77

Trophy Cam 119636C

Бренд: Bushnell Страницы: 36

Бренд: Leica Страницы: 358

NVIP-1DN3000H/IR-1P-II

Бренд: Novus Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды