44
Configure the settings relating to the mail notification [Notification]
Click the [Notification] tab on the "Alarm setup" page. (
☞
page 40)
The settings relating to the alarm mail can be configured on this page. To notify of an alarm occurrence by e-mail, it
is necessary to configure the settings of the mail server. (
☞
page 48)
■
E-mail notification setup
[To E-mail server setup]
When "To E-mail server setup" is clicked, the [Mail] tab
of the "Server setup" page will be displayed. (
☞
page
48)
[E-mail notification]
Select "ON" or "OFF" to determine whether or not to
notify of an alarm occurrence by e-mail at an alarm
occurrence.
Default setting:
OFF
■
E-mail notification setup
[Address 1] to [Address 4]
Enter the destination mail address. Up to 4 destination
addresses can be registered.
To notify by e-mail when an alarm occurred, check the
"Alarm" checkbox respective to the desired address.
To delete the registered address, click the [DEL] button
respective to the desired address.
Number of characters that can be entered:
3 - 128
characters
Default setting:
(blank)
[Mail subject]
Enter the mail subject.
Number of characters that can be entered:
0 - 50
characters
Default setting:
(blank)
[Mail body]
Enter the mail body.
Number of characters that can be entered:
0 - 200
characters
Default setting:
(blank)
Notes:
• By entering "%p%", it is possible to transmit alarm
type and channel information.
• By entering %y%”, “%m%”, “%d%”, or “%t%”, it is
possible to transmit the year, month, date or time
information only.
%y%: Year when the alarm occurs
%m%: Month when the alarm occurs
%d%: Date when the alarm occurs
%t%: Time when the alarm occurs
When the mail body is blank, year, month, date and
time information will be transmitted.
