Panasonic HYBRID IP-PBX KX-TDA100 Скачать руководство пользователя страница 186 | Manualshive

Страница: 186 / 364

Panasonic HYBRID IP-PBX KX-TDA100 Скачать руководство пользователя страница 186

1.11 M

186

Feature Manual

Feature Manual References

1.6.3 Flexible Buttons

2.1 Capacity of System Resources

Operating Manual References

1.3.42 Message Waiting

1.11.4 Music on Hold

Description

Music can be played to any party on hold. The following audio sources are available:

a)

Internal audio source

b)

External audio source

c)

Tone

Music Source Assignment

[KX-TDA100/KX-TDA200/KX-TDA600]

BGM1, BGM2, and tone can be selected as Music on Hold through system programming. External music
port 1 is assigned to BGM 1. It is possible to select whether external music port 2, internal audio source 1,
or internal audio source 2 is assigned to BGM2.
Having two external music ports, for example, allows the use of the BGM feature (

→

(Background Music)), while assigning a separate external music source (e.g., company message,
advertisement) to Music on Hold.

[BGM Number and the Audio Source]

Separate music sources can be assigned for the Music on Hold and the BGM features.

[KX-TDA50]

Only one external music port is available. If BGM is selected, it is possible to select whether external music
port, internal music port 1, or internal music port 2 is assigned to BGM.

Conditions

•

Hardware Requirement:

User-supplied audio device (CD player, radio, etc.) when an external music

source is assigned.

•

Volume Control

It is possible to change the volume of an internal and/or external audio source.

•

Each tenant can select a desired Music on Hold out of the available audio sources. (

→

BGM No.

Available Audio Sources

1

2

External music port 1

External music port 2/Internal audio source 1 or 2

«
...
184
185
186
187
188
...
»

Содержание HYBRID IP-PBX KX-TDA100













































































































































































































































































































































































Отзывы:

Нет отзывов