Panasonic HYBRID IP-PBX KX-TDA100 Скачать руководство пользователя страница 106 | Manualshive

Страница: 106 / 364

Panasonic HYBRID IP-PBX KX-TDA100 Скачать руководство пользователя страница 106

1.6 F

106

Feature Manual

Feature Manual References

1.6.3 Flexible Buttons

1.6.3

Flexible Buttons

Description

Flexible buttons are customized through either system or personal programming. The following types of
flexible buttons are found on proprietary telephones (PTs), DSS Consoles, Add-on Key Modules, and/or
portable stations (PSs):

a)

Flexible CO buttons

b)

Flexible Direct Station Selection (DSS) buttons

c)

Programmable Feature (PF) buttons

[Button Usage]

Button

Usage

Single-CO (S-CO)

Used to access a specified CO line for making or receiving calls.
(

→

1.3.14 CO Line Access)

Group-CO (G-CO)

Used to access an idle CO line in a specified trunk group for making
calls. Incoming calls from CO lines in the assigned trunk group arrive at
this button. (

→

1.3.14 CO Line Access)

Loop-CO (L-CO)

Used to access an idle CO line for making calls. Incoming calls from any
CO line arrive at this button. (

→

1.3.14 CO Line Access)

Direct Station Selection (DSS)

Used to call an extension with a one-touch operation.
(

→

1.9.13 Intercom Call)

Network Direct Station
Selection (NDSS)

Used to access an extension at another PBX within the same network.
(

→

1.13.15 Private Network Features—NDSS (Network Direct Station

One-touch Dialing

Used to call a preprogrammed party or access a feature with a one-
touch operation. (

→

1.12.4 One-touch Dialing)

Incoming Call Distribution
(ICD) Group

Used to access a specified incoming call distribution (ICD) group for
making or receiving calls. (

→

1.9.1 ICD GROUP FEATURES)

Message

Used to leave a Message Waiting indication or call back the party who
left the Message Waiting indication. (

→

1.11.3 Message Waiting)

FWD/DND (External/Internal/
Both)*

Used to set the FWD or DND feature for the extension. The feature is
applied to CO line calls, intercom calls, or both.
(

→

1.6.7 FWD/DND Button, Group FWD Button)

Group FWD (External/Internal/
Both)

Used to set the FWD feature for a specified ICD group. The feature is
applied to CO line calls, intercom calls, or both.
(

→

1.6.7 FWD/DND Button, Group FWD Button)

Account Code Entry (Account)

Used to enter an account code. (

→

1.1.2 Account Code Entry)

Conference

Used to establish a multiparty conversation. (

→

1.3.16 Conference)

«
...
104
105
106
107
108
...
»

Содержание HYBRID IP-PBX KX-TDA100













































































































































































































































































































































































Отзывы:

Нет отзывов