Panasonic HYBRID IP-PBX KX-TDA100, Руководство пользователя

Страница: 36 / 40

Troubleshooting and Error Messages
36
Even when in standby mode, you
cannot access the Phonebook or
other menus.
( is displayed in standby
mode.)
• The BGM setting may be on.
→
Press then , and press .
Noise is frequently heard.
→
Set the handset and base unit away from other electrical
appliances.
→
Move closer to the base unit.
Two short beeps are heard
during a conversation. • The radio signal is weak.
→
Move closer to the base unit.
The charge indicator flashes red
rapidly. • The charger is not connected properly.
→
Make sure the battery is inserted properly.
→
Set the handset in the charger properly.
You charged the battery for 7
hours, but the beep tones sound
every 5 seconds and (needs
to be charged) flashes after a few
telephone calls.
• The battery charge contacts may be dirty.
→
Clean the battery charge contacts without damaging them
and charge once more.
• It is time to change the battery.
→
Replace with a new one.
The battery indicator does not
display the remaining charge
properly after you replace the
battery.
→
Charge the battery for about 7 hours when the low battery
warning is displayed.
While operating the unit, the AC
adaptor feels warm. While
charging the battery, the handset
feels warm.
• These are normal conditions.
Problem Description and Solution
0 5 1 7