Panasonic HX-A100, Основное руководство по эксплуатации

Страница: 7 / 32

7
VQT4X90
∫
When inner side of the lens is fogged (condensation)
Condensation may occur and the inner side of the lens may be fogged when this unit is moved to a
warm area from a cold area, such as at high altitude.
It is not a malfunction or failure of this unit. It may be caused by the environment in which
this unit is used.
≥ Be careful of condensation since it causes lens stains, fungus and unit malfunction.
What to do when inner side of the lens is fogged
≥ Turn off this unit and open the side cover in a place with constant ambient temperature, away
from high temperatures, humidity, sand and dust. The fog will disappear naturally in about 2 hours
with the side cover open when the temperature of this unit gets close to the ambient temperature.
≥
Contact Panasonic’s Service Centre if the fogging does not disappear.
1 Open the side cover.
2 Check that there are no foreign objects on the inner side of the side cover.
≥
If there are any foreign objects, such as lint, hair, sand, etc., on the surrounding area, water will
leak within a few seconds causing malfunction.
3 If there is foreign matter adhering to the unit, remove it.
≥ Be extremely careful to remove any sand etc. that may adhere to the sides and corners of the
rubber seal.
≥
Wipe it off with a dry soft cloth if there is any liquid. It may cause water leaks and malfunction if
you use this unit with liquid adhered.
4 Check for cracks and deformation of the rubber seal on the side cover.
≥
The integrity of the rubber seals may decrease after about 1 year, with use and age. To avoid
permanently damaging this unit the seals should be replaced once every two years. Please
contact Panasonic’s Service Centre for related costs and other information.
5 Close the side cover securely.
≥ To prevent water seeping into this unit, be careful not to trap foreign objects such as
liquids, sand, hair or dust etc.
Check before using underwater
Do not open or close the side cover in places with sand and dust, close to water, or with wet
hands. Sand or dust adhering may cause water leaks.
1
Slide the LOCK switch
A
to the left to
unlock the side cover.
B
: Unlocked when the red indicator is visible
2
Slide the side cover downward to
open it.


A
B
1
Close the side cover and slide it
upward.
2
Slide the LOCK switch to the right to
lock the side cover.
≥
Lock securely to the points where the
red portion of the LOCK switch is no
longer visible.
≥
Securely close it until it clicks.


HX-A100_VQT4X90_mst.book 7 ページ ２０１３年１月２２日 火曜日 午後８時８分