Installing the outdoor camera
1
Open the interface cover (
A
), and then
slide the power slide switch to ON (
B
) .
2
Close the interface cover (
C
).
3
Secure the safety wire ring to the camera
nut of the camera using a driver (
D
), and
then pass the safety wire through the ring
of the safety wire ring (
E
).
4
5
1
2
3
Important:
R
Make sure to close the interface
cover securely. Weatherproofness
cannot be assured if the interface
cover is open.
4
Drive the wall mounting screws into the
wall.
1
Longer than 25 mm (1 inch)
2
Space 2.8 mm (
1
/
8
inches)
1
2
Note:
R
Use the following template when
determining the location of the screw
holes.
(1 inch)
25.4 mm
28
For assistance, visit www.panasonic.ca/english/support
Setup
HN7051C_(en_en)_0319_ver.040.pdf 28
2018/03/19 19:00:12