37
Installation and connection
• Veneer or other finish of the furniture the appliance is being
built into should be processed with heat-resistant glue
(100°C); otherwise, high temperatures may cause them to
deform.
• Before installing the appliance, remove the back wall from
the piece of kitchen furniture the appliance is being built
into, along the entire length of the cutout.
• The installation cutout should be dimensioned as indicated
in the figure.
• The bottom panel of the piece of kitchen furniture (Max.
530 mm) should always be shorter than the side walls to
enable adequate air circulation.
• Level the piece of furniture the appliance was built into with
a spirit level.
• The piece of kitchen furniture the appliance is built into
must be secured against movement, e.g. Attached to the
adjacent pieces of kitchen furniture.
• Push the appliance into the kitchen furniture enough that
the guides for the screws that are inserted in the oven
frame holes are placed against the kitchen side walls.
• When attaching the appliance, make sure the screws are
not fastened too strongly as this may damage the furniture
or the appliance enamel coating.
• The appliance should be fitted with a device that disconnects it from all poles of the home
network (an omnipolar switch), with at least 3 mm of distance between the contacts in
open position. Miniature circuit breakers or fuses are appropriate.
• To connect the appliance, use the rubber mains cords (type HO5RR-F with the green/
yellow earth wire), PVC insulated (type HO5VV-F with the green/yellow earth wire), or
other equivalent or superior cables. The cable must be rated at 16 Ampere or greater. The
screw terminals can accept conductors between 1.5mm² and 6.0mm².
• Veneer, glue, or plastic finish of the furniture next to which the cooker is installed, should
be heat resistant (100°C). If the veneers are not high temperature resistant, they may be
damaged.
• Packaging (plastic foil, polystyrene, etc.) must be kept out of reach of children, as it can be
a source or threat to them. Small parts can be swallowed by the children, and the foils are
hazardous because of the risk of suffocation.
Important warnings
Installation
T
he appliance may only be connected by a qualified electrician.
Содержание HL-CK644S
Страница 2: ...2 ...
Страница 41: ......
Страница 42: ...Panasonic Manufacturing U K Ltd http www panasonic net Panasonic Corporation 2014 E000342U1BP ...