30
Removing wire guide racks
To facilitate cleaning of the oven interior side walls, the wire
guide rack can be removed.
• The guide rack is held in place by a clip. To remove the
guide rack, hold it by the lower end and pull towards the
center of the oven (fig 1). Make sure that the guide has
been released from both clips then rotate inwards (fig 2) to
remove from the side of the oven.
• Only clean with conventional cleaners.
• After cleaning, re-hang the guide racks and clip back into
place.
Special enamel coating
The oven, interior side of the door, and baking trays, are covered with special enamel that
has a smooth and resistant surface. This special layer enables easier cleaning at room
temperature.
Accessories
Wash the accessories (baking trays and wire shelf) with hot water and some conventional
detergent.
Practical tip
• When cooking larger fatty pieces of meat or poultry, we recommend covering them in aluminum
foil, to prevent the grease from being spattered on the oven interior walls.
• When grilling meat on the wire shelf, place a drip tray underneath.
