manualshive.com logo in svg

Panasonic HL-BD82S, Руководство по обслуживанию

Поделиться
Скачать
Panasonic HL-BD82S Скачать руководство пользователя страница 7

HL-BD82S

7

5 Location of Controls and Components

5.1.

Control Panel

The user interface has the following features: display, keys for commands, cooking mode and temperature selector 

5.1.1.

Command Keys

 [TIME]: touch this key until [SET TIME] appears to set or change the time of day. Touch this key until [TIMER] appears to set,

modify or clear the minute minder value. Once a cooking function has been, touch this key until [TIME] appears in order to set, mod-
ify or cancel the cooking time. Touch this key until [STOP TIME] appears in order to set, modify or cancel the end of cooking time.
Whenever one of the former modes has been enabled and its digits flash, touch or hold:

 - [INC]

: key to increase the value.

 

- [DEC]

: key to decrease the value.

 [FAST PREHEAT]

: When a cooking function has been selected, touch this key to enable the fast preheat mode. The fast pre-

heat is not available for all functions.

 

[OPTIONS]

: Touch this key to enable special functions, low temperature modes or to enter special menu.

 [LIGHT]

: Touch it to switch the oven lights status.

5.1.2.

Display

Central Red Display for time and miscellaneous functions: 

for time of day, minute minder, automatic cooking. AM/PM indication

is also present.
Miscellaneous indications are also available to show which cavity is currently selected and whether any door has been locked,
automatically for self-clean or manually by the user.

Red Display for Temperature indications: 

Degree unit (

°

C or 

°

F) indication is present. It shows the temperature set-point for the

current cooking mode, in the selected cavity.

Red Display with writings for Cooking Modes indication

 to indicate which function has been selected.

5.1.3.

 Knobs

Cooking mode selector (multifunction)

, with eight cooking modes + OFF position.

Cooking mode selector (thermal)

, with three cooking modes + OFF position.

Temperature selector

 with PRESET and CLEAN pos continuous range between MIN and MAX values.

Содержание HL-BD82S






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды