5
10
Peak / bottom hold function
The peak / bottom hold function is for displaying the peak value and the bot-
tom value.
When the zero set function is executed while the peak / bottom hold func
-
tion is set to “Peak hold” or “Bottom hold”, the held measured value will be
reset.
Press the TEACH
key and UP key
simultaneously for 3
seconds.
Press the
UP/DOWN key
Press the
TEACH key
Confirmed
Select
or
or
or
(automatically
set after 3
seconds.)
Digital
display
Description
Function
Hold function release
Releases the hold status, and outputs
the current measured value
Peak hold
Holds maximum measured value
Bottom hold
Holds minimum measured value
11
Zero set function
The zero set function is the function to compulsory set the measured value
to ‘zero’.
The zero set indicator (yellow) will turn ON when the zero set is valid.
When the display setting is set to Offset, the zero set function cannot be
set.
“Zero set” setting
Confirmed
Press the UP and
DOWN key
simultaneously for 3
seconds.
Zero set release
Automatic
will be displayed
during this period.
Press the UP and
DOWN key
simultaneously for 6
seconds.
12
Key lock function
The key lock function is to prevent acceptance of key operations, so that
the conditions in each setting mode are not changed accidentally.
When the key operation is performed after the key lock is set,
“
”
will be
displayed on the digital display.
Key lock setting
Press the TEACH
key and DOWN key
simultaneously for 3
seconds.
Automatic
Key lock release
Press the TEACH
key and DOWN key
simultaneously for 3
seconds.
Automatic
13
PRO mode setting
Part description
1
2
3
4
No.
Item
1
PRO indicator (Yellow)
2
DOWN key (Select)
3
UP key (Select)
4
TEACH key (Confirmed)
Arrow description in figures
Arrow
Description
Press the TEACH key
Press UP key or DOWN key
Press DOWN key
Press the DOWN key for 3 seconds or more to switch to PRO MODE. The
PRO indicator (yellow) will turn ON when the PRO MODE is active. To re-
turn to the measurement display, press the DOWN key again for 3 seconds
or more.
