Panasonic HDC-TM350, Руководство по эксплуатации

Страница: 61 / 151

60
VQT2H62
Function Effect/Setting method
Digital cinema Use this function to record an image with vivid colour, like an
image on a movie film.
≥
Change the mode to .
≥
The intelligent auto mode is set to off. (
l
36)
≥
Set the recording mode to HA or HG. (
l
41)
Select the menu. (
l
22)
[RECORD SETUP]
#
[DIGITAL CINEMA]
#
[ON]
≥
When [DIGITAL CINEMA] is [ON], smooth viewing of the motion
pictures may not be possible.
≥
The picture will be recorded as 50i (
l
97) irrespective of the
digital cinema mode setting.
Relay recording It is possible to continuously record motion picture to an SD
card when there is no space available in the built-in memory.
≥
Change the mode to .
Select the menu. (
l
22)
[RECORD SETUP]
#
[RELAY REC]
#
[ON]
≥
is displayed on the screen. will disappear when space
in the built-in memory is gone and the recording to the SD card
starts.
≥
It allows to record only to SD card from built-in memory.
≥
Relay recording can only be performed once.
≥
Combine the scenes that were relay recorded using the
[RELAY SCENE COMBINE] into the SD card. (
l
92)
≥
Once the relay recorded scene and the scene that was recorded
on the SD card after that are combined into the SD card using the
[RELAY SCENE COMBINE], it will be possible to perform the
relay recording again. If the [RELAY REC] is set to [ON] without
performing the [RELAY SCENE COMBINE], a message is
displayed. You will be able to perform relay recording by touching
[YES], but you will not be able to perform the [RELAY SCENE
COMBINE] after that.