Panasonic HDC-SDT750EB, Руководство по обслуживанию

Страница: 17 / 93

17
Recording 3D video
When using for the first time, be sure to adjust the 3D Conversion Lens attachment position.
Turn off the unit.
Change the mode to
.
1
Attach the 3D Conversion Lens to the unit.
2
Turn on the unit.
Turn on with the unit in a horizontal state.
The 3D Conversion Lens adjustment mode screen will appear automatically after
performing the initial setting.
If the 3D Conversion Lens adjustment mode screen does not appear automatically,
set from the menu.
([SETUP]
[3D CONV. LENS SETUP])
If the unit is turned on with the USB cable still connected, the USB connection will take
priority.
3
Attach the lens front cap to the 3D
Conversion Lens.
2 screens will appear.
The horizontal line for adjustment on the lens front cap is
displayed on the screen.
Guide Line
4
Touch [ADJUST].
If the black vertical line and the black horizontal line are within the red guidelines and
adjustment is not required, touch [EXIT] and proceed to Step 11.
Perform the adjustment in a bright location where the horizontal line for adjustment will be
clearly visible.
The 3D Conversion Lens cannot be adjusted using the viewfinder.
5
Open the adjustment dial cover.
When turning the adjustment dials, hold the 3D Conversion
Lens in the palm of your hand from the bottom and operate
with the fingers of your other hand without applying too much
force from above. When checking the adjustment, check with
your fingers off the adjustment dials.
6
(After checking the operation description, touch [NEXT].)
To adjust the horizontal position, rotate the horizontal image
position adjustment dial
so that the black vertical line is between
the red guidelines .
Touch [NEXT].