85
VQT3B52
Shutter Speed:
Adjust it when recording fast-moving subjects.
Iris:
Adjust it when the screen is too bright or too dark.
≥
Press the iA/MANUAL button or the CAMERA FUNCTION button to switch to manual
mode. (
≥
For how to perform the settings when using the viewfinder, refer to page 83.
1
Touch [SHTR] or [IRIS].
2
Touch
/
to adjust
settings.
:
Shutter speed:
1/50 to 1/8000
≥
If [AUTO SLOW SHTR (2D)] is set to [ON],
the shutter speed will be set between 1/25
and 1/8000.
≥
The shutter speed closer to 1/8000 is
faster.
≥
The shutter speed will be set between 1/2
and 1/2000 in still picture recording mode.
:
Iris/Gain value:
CLOSE
!#
(F16 to F1.7)
!#
OPEN
!#
(0dB
to 18dB)
≥
Value closer to [CLOSE] darken the
image.
≥
Value closer to [18dB] brighten the image.
≥
When the iris value is adjusted to brighter
than [OPEN], it changes to the gain value.
≥
To return to auto setting, press the
iA/MANUAL button again.
≥
When setting both the shutter speed and
the iris/gain value, set the shutter speed
and then set the iris/gain value.
Manual shutter speed adjustment
≥
When the shutter speed is set lower than
1/12 in the still picture recording mode, it
is recommended using a tripod. Also,
white balance cannot be set. The shutter
speed will be set to 1/25 when the unit is
turned on again or when the quick start is
performed.
≥
You may see a band of light around the
object that is shining very bright, or having
very high reflection.
≥
During normal playback, image movement
may not look smooth.
≥
If you record an extremely bright object or
record under indoor lighting, colour and
screen brightness may change or a
horizontal line may appear on the screen.
In this case, record in the intelligent auto
mode or set the shutter speed to 1/100 in
areas where the power supply frequency
is 50 Hz, or 1/125 in areas of 60 Hz.
Manual iris/gain adjustment
≥
Luminance level and histogram are
displayed during the iris adjustment.
(
≥
If the gain value is increased, the noise on
the screen increases.
≥
Depending on the zoom magnification,
there are iris values that are not displayed.
Manual shutter speed/iris adjustment
SHTR
IRIS